Procedia Structural Integrity - 2023

Publié:	2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Nath, Atri / Ray, Ayan / Ray, K. K.	Analyses of the model parameters of kinematic-isotropic hardening rule using genetic algorithm approach for predicting cyclic-plasticity of metallic structural materials	246-251
Becker, Wilfried / Kirilova, Elisaveta / Petrova, Tatyana / Ivanova, Jordanka	Analytical and parametric analysis of interface stress behaviour in nanoclay/polymer composite	77-82
Pustaić, Dragan / Lovrenić-Jugović, Martina	Cohesive Model Application in the Assessment of Plastic Zone Magnitude for One Particular Case of Crack Loading	252-257
Trávníček, Lukáš / Poduška, Jan / Kučera, Jaroslav / Náhlík, Luboš / Hutař, Pavel	Comparison of fatigue performance of polyethylene pipe grades in the form of extruded and compression molded specimens	148-153
Molnárová, Orsolya / Školáková, Andrea / Habr, Stanislav / Čapek, Jaroslav / Weiss, Zdeněk / Málek, Přemysl / Lejček, Pavel	Complex severe plastic deformation of aluminum single crystal	166-171
Polášek, Miroslav / Krbaťa, Michal / Eckert, Maroš / Mikuš, Pavol / Cíger, Róbert	Contact Fatigue Resistance of Gun Barrel Steels	306-311
Malla, Komal P. / Henning, Sven / Lach, Ralf / Jennissen, Herbert / Michler, Goerg / Beiner, Mario / Adhikari, Rameshwar	Correlation between Morphology, Mechanical Properties and Microdeformation Behavior of Electrospun Scaffolds Based on a Biobased Polymer Blend and Biogenic Nano-Hydroxyapatite	71-76
Kozák, Vladislav / Vala, Jiří	Crack growth modelling in cementitious composites using XFEM	47-52
Šomodíková, Martina / Lipowczan, Martin / Lehký, David	Determination of concrete fracture parameters using inverse analysis: Influence of the tensile softening model	258-263
Cíger, Róbert / Krbaťa, Michal / Kianicová, Marta / Eckert, Maroš / Chochlíková, Henrieta	Effect of heat treatment on notch toughness of powdered tool steels M390 and M398	312-317
Pilsová, Lucie / Ohanková, Marie / Mára, Vladimír / Krčil, Jan / Horváth, Jakub	Effect of Internal Pressure on Microstructural and Mechanical Properties of X10CrNiCuNb18-9-3 (SUPER 304H) Austenitic Stainless Steel	294-299
Oberreiterr, Matthias / Stoschka, Michael / Horvath, Michael / Fladischer, Stefan	Effect of local microstructure on fatigue and related failure mechanisms in AlSi-castings	240-245
Judas, Jakub / Zapletal, Josef / Řehořek, Lukáš / Jan, Vít	Effects of annealing temperature on microstructure and mechanical properties of cold sprayed AA7075	160-165
Zak, Stanislav / Lassnig, Alice	Elastic Mismatch Influence on Modes I and II Ratio during Buckling-induced Delamination	23-28
Juhászová, Tereza / Miarka, Petr / Jindra, Daniel / Kala, Zdenek / Seitl, Stanislav	Evaluation of Fatigue Crack Growth Rates in an IPE Beam Made of AISI 304 under Various Stress Ratios	172-177
Klusak, Jan / Kozáková, Kamila / Jambor, Michal / Seitl, Stanislav	Fatigue behavior of DIN 1.4307 and DIN 1.4306 stainless steels under high frequency loading	142-147
Malikova, Lucie / Doubek, Pavel / Juhászová, Tereza / Krejsa, Martin / Seitl, Stanislav	Fatigue crack propagation under corrosion of high-strength steel	264-269
Man, Jiří / Blinn, Bastian / Šulák, Ivo / Kuběna, Ivo / Smaga, Marek / Chlup, Zdeněk / Kruml, Tomáš / Beck, Tilmann / Polák, Jaroslav	Formation of deformation induced martensite in fatigued 316L steels manufactured by selective laser melting (SLM)	203-208
Golubev, V. I. / Nikitin, I. S. / Vasyukov, A. V. / Nikitin, A. D.	Fractured inclusion localization and characterization based on deep convolutional neural networks	29-34
Šulák, Ivo / Hrbáček, Karel / Obrtlík, Karel	High Temperature Fatigue Properties of Boron-doped Superalloy B1914	209-214
Horník, Vít / Bača, Adrián / Šmíd, Miroslav / Hrbáček, Karel / Hutař, Pavel	High-cycle fatigue behavior of IN 738LC superalloy at high temperatures	136-141
Miarka, Petr / Seitl, Stanislav / Klusak, Jan / Malikova, Lucie / Merta, Ildiko / Bílek, Vlastimil	High-cycle fatigue cracks in concrete investigated by μCT tomography	124-129
Mikula, Pavol / Ryukhtin, Vasyl	High-Resolution Three-Axis Neutron Diffractometer for Microstructure Investigations of Polycrystalline Materials	119-123
Tomáš, Jiří	Higher-order and Weil generalization of Grassmannian	65-70
Eckert, Maroš / Krbaťa, Michal / Kohutiar, Marcel / Kuba, Michal	Hot Deformation Analysis of 100MnCrW4 Tool Steel	318-323
Faktorová, Dagmar / Kuba, Michal / Pavlíková, Soňa / Fabo, Peter	Implementation of the impedance spectroscopy using a modern microcontroller	288-293
Šustková, Apolena / Thomková, Barbora / Zikmund, Tomáš / Kaiser, Jozef / Joukal, Marek / Marcián, Petr	The influence of image processing of μ-CT images on mechanical behavior of mandibular trabecular bone structure using micro finite element method	276-281
Seitl, Stanislav / Horník, Vít / Lesiuk, Grzegorz / Kunz, Ludvík	Influence of Micro-structure of selected components made from AISI 304 on the mechanical properties	113-118
Doubek, Pavel / Malikova, Lucie / Miarka, Petr / Seitl, Stanislav	Laser cladded protective layer on the S960 Change of microhardness in the vicinity of the bi-material interface	101-106
Bílek, Vlastimil / Soucek, Kamil / Khestl, Filip / Bujdos, David / Seitl, Stanislav	Mechanical and Fracture Parameters of Concretes with Different Water to Cement Ratio in Two Different Conditions of Curing	107-112
Polák, Jaroslav / Chlupová, Alice	Mechanisms of intergranular fatigue crack initiation in polycrystalline materials	197-202
Kotrechko, Sergiy / Kozák, Vladislav / Zatsarna, Oleksandra / Zimina, Galyna / Stetsenko, Nataliya / Dlouhy, Ivo	Micromechanical aspects of the effect of temperature and local plastic strain magnitude on the fracture toughness of ferrite steels	228-233
Shanyavskiy, A. / Shlyannikov, V. / Soldatenkov, A. / Rubtsov, V.	Micromechanics of fatigue, creep-fatigue interaction and thermo-mechanical crack growth of XH73M nickel alloy	215-220
Varmus, Tibor / Konečná, Radomila / Nicoletto, Gianni / Uriati, Federico	Microstructure and Fatigue Properties of Al2024-RAM2 Aluminum Alloy Obtained by Laser Powder Bed Fusion	184-189
Jivkov, Andrey P. / Berbatov, Kiprian / Boom, Pieter D. / Hazel, Andrew L.	Microstructures, physical processes, and discrete differential forms	15-22
Nakai, Yoshikazu / Kikuchi, Shoichi / Shiozawa, Daiki / Nakazawa, Issei / Fujita, Keisuke / Kawabata, Mie O. / Ameyama, Kei	Misorientation Measurement in Tensile Test of Bimodal Harmonic Structured Stainless Steel by Diffraction Contrast Tomography Using Ultrabright Synchrotron Radiation X-ray	221-227
Petrova, Tatyana / Kirilova, Elisaveta / Becker, Wilfried / Vaklieva-Bancheva, Natasha / Vladova, Rayka / Dineva-Vladikova, Petya	Modelling of the two-dimensional stresses in a three-layered adhesively bonded tungsten disulfide/poly(methyl methacrylate) nanocomposite structure under axial load	83-88
Blixt, Kevin / Christierson, Lea / Ahadi, Aylin / Hansson, Per / Melin, Solveig	Molecular dynamics simulations of nanometric cutting of single crystal copper sheets using a diamond tool	9-14
Nikitin, A. D. / Nikitin, I. S. / Stratula, B. A.	Multi-regime fatigue failure model based on damage theory	53-58
Prakash, Raghu V.	Multi-sensor techniques to study fatigue damage progression in structural materials	190-196
Szlosarek, Robert / Kröger, Matthias	Multiaxial fatigue crack initiation in bolted sheet material	41-46
Vala, Jiří / Kozák, Vladislav	On a computational stress-based non-local damage model for quasi-brittle composites	59-64
Krbaťa, Michal / Eckert, Maroš / Cíger, Róbert / Kohutiar, Marcel	Physical modeling of CCT diagram of tool steel 1.2343	270-275
Campbell, John	The Pre-Existing Microcrack Population in Metals A Personal Overview	234-239
Kozáková, Kamila / Klusak, Jan	Prediction of the fatigue life of notched specimens: The influence of the surface quality produced by machining	178-183
Djoković, Jelena M. / Nikolić, Ružica R.	Prediction of the propagation direction of a crack that attacks the interface at an arbitrary angle	95-100
Romanov, Pavel / Jahedi, Mohammad / Petersson, Anders / Moshfegh, Bahram / Calmunger, Mattias	Quenching of Carbon Steel Plates with Water Impinging Jets: Differential Properties and Fractography	154-159
Molčanová, Zuzana / Ballóková, Beáta / Kušnírová, Katarína / Oroszová, Lenka Oroszová / Gloc, Michael / Ciupiński, Łukasz / Saksl, Karel	Residual stresses of explosively welded bimetal studied by hard X-ray diffraction	89-94
Ohanková, Marie / Čmakal, Josef / Junek, Michal / Kvapilová, Marie / Dvořák, Jiří / Sklenička, Václav	Root cause of embrittlement of in-service exposed high pressure steam pipeline	300-305
Bhattacharyya, Arnab / Ray, Ayan / Ray, Kalyan Kumar	A Simple Principle for Fracture Toughness Assessment of Ductile Materials by Ball Indentation Technique	35-40
Paidar, Václav	Slip of c+a Dislocations in hcp Metals	3-8
Kirilova, Elisaveta / Petrova, Tatyana / Vaklieva-Bancheva, Natasha / Vladova, Rayka / Rangelov, Tsviatko / Apostolov, Apostol	Theoretical study about influence of geometry and mechanical load on the delamination in tungsten disulfide/poly(methyl methacrylate) nanocomposite structure under axial load	282-287
Calmunger, Mattias / Wärner, Hugo / Chai, Guocai / Segersäll, Mikael	Thermomechanical Fatigue of Heat Resistant Austenitic Alloys	130-135

Informations
sur cette fiche
IssueID
69421
Publié(e) le:
21.03.2023
Modifié(e) le:
21.03.2023

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Procedia Structural Integrity - 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Procedia Structural Integrity - 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.