Procedia Structural Integrity - 2019

Publié:	2019

Auteur(s)	Titre	Page(s)
Ata, Tamer Tahir / Coker, Demirkan	3D Simulation of Dynamic Delamination in Curved Composite Laminates	130-137
Kurt, Emre / Demir, Oğuzhan / Ayhan, Ali O.	Applications on Three-Dimensional Mixed Mode Fatigue Crack Propagation Using Fracture and Crack Propagation Analysis System (FCPAS)	21-30
Aikawa, Taiko / Kawabata, Tomoya	Consideration on the toughness difference depending on the direction of brittle crack propagation in very thick steel	173-184
Yalçinkaya, Tuncay / Tandoğan, İzzet Tarik / Cocks, Alan	Development of a Micromechanics Based Cohesive Zone Model and Application for Ductile Fracture	52-60
Heidari Shabestari, S. Sohrab / Kayran, Altan	Development of a regression model for the life assessment of open-hole specimens with double through cracks utilizing stress intensity factor calculations via XFEM	154-165
Yaren, Mehmet F. / Ayhan, Ali O. / Iriç, Sedat	Evaluation of Different Crack Growth Retardation Models Under Single Overloads Using Al-7075 Material	31-37
Tekoğlu, C. / Çelik, Ş. / Duran, H. / Efe, M. / Nielsen, K. L.	Experimental Investigation of Crack Propagation Mechanisms in Commercially Pure Aluminium Plates	2-11
Bostancı, Safa Mesut / Gurses, Ercan / Coker, Demirkan	Finite Element Modelling of TBC Failure Mechanisms by Using XFEM and CZM	91-100
Yalçinkaya, Tuncay / Erdoğan, Can / Tandoğan, İzzet Tarik / Cocks, Alan	Formulation and Implementation of a New Porous Plasticity Model	46-51
Hredil, M. / Krechkovska, H. / Student, O. / Kurnat, I.	Fractographic features of long term operated gas pipeline steels fracture under impact loading	166-172
Benvidi, Amir H. / Ayatollahi, Majid R. / Heydari-Meybodi, Mahdi	Fracture analysis of rounded-tip V-notched components made of rubber-like materials using averaged strain energy density criterion	12-20
Irmak, E. F. Akbulut / Tröster, T.	Fracture prediction of additively manufactured AlSi10Mg materials	190-197
Bilisik, Kadir / Erdogan, Gulhan / Sapanci, Erdal / Gungor, Sila	Fracture Toughness (Mode-II) of Nanostitched Composites	146-153
Demirel, Gürzap İ. / Kayran, Altan	Implementation of Dirlik’s damage model for the vibration fatigue analysis	101-111
Kaewunruen, Sakdirat / Aikawa, Akira / Remennikov, Alex M.	The importance of ‘dynamics’ in the design and performance-based testing criteria for railway track components	83-90
Mupe, Nathaniel / Miyamoto, Hiroyuki / Yuasa, Motohiro	Improvement of the Mechanical Properties of Magnesium Alloy AZ31 Using Non-linear Twist Extrusion (NTE)	73-82
Yavuz, Burak Ogun / Parnas, Levend / Coker, Demirkan	Interlaminar tensile strength of different angle-ply CFRP composites	198-205
Paygozar, B. / Dizaji, S. A.	Investigating Energy Absorption Accessible by Plastic Deformation of a Seismic Damper Using Artificial Neural Network	138-145
Ozen, Emine Burcin / Korkmaz, Yezdan Medet / Coker, Demirkan	Investigation of fretting fatigue failure mechanism of lug-bush connection members	215-223
Aytuna, O. Berk / Efe, Mert	Investigation of Portevin-LeChatelier Bands in 5754 Aluminum Alloy under Various Strain Paths	120-129
Yavuz, Hande	Materials Selection for Aircraft Skin Panels by Integrating Multiple Constraints Design with Computational Evaluations	112-119
Bolzon, Gabriella / Rivolta, Barbara	Mechanical characterization of metals by small sampling size	185-189
Yalçinkaya, Tuncay / Güngör, Gönül Öykü / Çakmak, Serhat Onur / Tekoğlu, Cihan	A Micromechanics Based Numerical Investigation of Dual Phase Steels	61-72
Çakmak, Serhat Onur / Yalçinkaya, Tuncay	Morphology and Grain Orientation Dependent Localization and Necking in Dual-phase Steels	224-232
Bozkurt, Mirac Onur / Parnas, Levend / Coker, Demirkan	Simulation of Drop-Weight Impact Test on Composite Laminates using Finite Element Method	206-214
Sahin, Hakan / Ayhan, Ali O.	Three-Dimensional Mixed Mode Stress Intensity Factors for Inclined Elliptical Surface Cracks in Plates under Uniform Tensile Load	38-45

Auteur(s)

Titre

Page(s)

Ata, Tamer Tahir / Coker, Demirkan

3D Simulation of Dynamic Delamination in Curved Composite Laminates

130-137

Kurt, Emre / Demir, Oğuzhan / Ayhan, Ali O.

Applications on Three-Dimensional Mixed Mode Fatigue Crack Propagation Using Fracture and Crack Propagation Analysis System (FCPAS)

21-30

Aikawa, Taiko / Kawabata, Tomoya

Consideration on the toughness difference depending on the direction of brittle crack propagation in very thick steel

173-184