Procedia Structural Integrity - 2019

Publié:	2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Stancu, Andra Gabriela / Zhou, Linghao / Soua, Slim	Acoustic Emission-Based Similarity Analysis: A Baseline Convergence Algorithm	238-245
Gruenewald, Patrick / Rauber, Jonas / Marx, Michael / Motz, Christian / Schaefer, Florian	Acquiring in situ Fatigue Crack Growth Curves by a Compliance Method for Micro Bending Beams to Reveal the Interaction of Fatigue Cracks with Grain Boundaries	13-20
Baptista, R. / Infante, V. / Freitas, M.	An algorithm for fatigue crack growth applied to mixed and biaxial mode loadings	547-554
Medrea, C. / Pappa, E. / Papageorgiou, D. G. / Stergiou, C.	Analysis of cracks propagated in a tee pipe fitting	526-531
Hartweg, Moritz / Bär, Jürgen	Analysis of the crack location in notched steel bars with a multiple DC potential drop measurement	254-261
Castro, Juan Cruz / Palafox, Edgar Hernández / Gómez, Luis Héctor Hernández / Mendoza, Gilberto Soto / Grijalba, Yunuén López / López, Pablo Ruiz	Analysis of the structural girders of a crane for the license renewal of a BWR Nuclear Power Plant	115-122
Bhat, Sunil / Adarsha, H. / Ravinarayan, V. / Koushik, V. P.	Analytical model for estimation of energy release rate at mode I crack tip in bi-material of identical steels joined by an over-matched weld interlayer	21-28
Sousa, Pedro J. / Carneiro, Fernando / Ramos, Nuno Viriato / Barros, Francisco / Vaz, Mário A. P. / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Application of 3D electronic speckle pattern interferometry for the analysis of thermal response in printed circuit boards	835-842
Arco, A. / Figueiras, I. / Pedroso, L. / Araújo dos Santos, J. V. / Lopes, H.	Application of spline interpolation to speckle shearography measurements for damage identification	718-725
Zhu, J. / Khurshid, M. / Barsoum, Z.	Assessment of computational weld mechanics concepts for estimation of residual stresses in welded box structures	704-711
Sandnes, Lise / Romere, Luca / Grong, Øystein / Berto, Filippo / Welo, Torgeir	Assessment of the Mechanical Integrity of a 2 mm AA6060-T6 Butt Weld Produced Using the Hybrid Metal Extrusion & Bonding (HYB) Process – Part II: Tensile Test Results	632-642
Igor, Berta / Marcela, Pokusová	Austenitic cast iron resistant against the abrasive material degradation	509-513
Moussaoui, B. / Bouamra, Y. / tahar, K.Ait / Amrouche, M. Ould / Ouabed, D.	Behavior of short concrete cylinders partially confined with GFRP composites	979-985
Konopik, Pavel / Rund, Martin / Rzepa, Sylwia / Dzugan, Jan / Melzer, Daniel	Compatibility of fracture toughness results in the upper shelf region	479-486
Apostolopoulou, Maria / Armaghani, Danial J. / Bakolas, Asterios / Douvika, Maria G. / Moropoulou, Antonia / Asteris, Panagiotis G.	Compressive strength of natural hydraulic lime mortars using soft computing techniques	914-923
Morais, Paulo / Morais, João / Santos, Carlos / Paixão, André / Fortunato, Eduardo / Asseiceiro, Francisco / Alvarenga, Paula / Gomes, Luis	Continuous Monitoring and Evaluation of Railway Tracks: Proof of Concept	419-426
Morais, João / Santos, Carlos / Morais, Paulo / Paixão, André / Fortunato, Eduardo / Asseiceiro, Francisco / Alvarenga, Paula / Gomes, Luis	Continuous Monitoring and Evaluation of Railway Tracks: System Description and Assessment	448-455
Pereira, M. V. / Teixeira, M. C. / Darwish, F. A.	Correlation between fractographic aspects and stress intensity factor in very high cycle fatigue	105-114
Taylor, Jessica / Mehmanparast, Ali / Kulka, Rob / Moore, Philippa	Correlation between steel initiation toughness and arrest toughness determined from small-scale mechanical testing	472-478
Tsouli, S. / Lekatou, A. G. / Nikolaidis, C. / Kleftakis, S.	Corrosion and tensile behavior of 316L stainless steel concrete reinforcement in harsh environments containing a corrosion inhibitor	268-275
Sieber, Lars / Urbanek, Ralf / Bär, Jürgen	Crack-Detection in old riveted steel bridge structures	339-346
Zhao, Zizhen / Yu, Dunji / Chen, Xu	Creep-ratcheting-fatigue life prediction of bainitic 2.25Cr1MoV steel	555-561
Funk, Meike / Bär, Jürgen	DCPD based detection of the transition from short to long crack propagation in fatigue experiments on the aluminum alloy 7475 T761	183-189
Martin, Garan / Miroslav, Šulko	Degradation mechanisms in the operation of pressured pipelines	514-519
de Moraes, Flavio Pereira / Alves, Sandro Francisco / Plaut, Ronald Lesley / Padilha, Angelo Fernando	Degradation of microstructure and properties of an AISI 316L steel pipe after more than 100,000 hours usage at 640°C in a petrochemical industry	131-137
Bär, Jürgen / Seilnacht, Luca / Urbanek, Ralf	Determination of dissipated energies during fatigue tests on Copper and AA7475 with Infrared Thermography	308-315
Shi, Liting / Kang, Jidong / Chen, Xu / Haselhuhn, Amberlee S. / Sigler, David R. / Carlson, Blair E.	Determination of Fracture Modes in Novel Aluminum-Steel Dissimilar Resistance Spot Welds	355-362
Sousa, Pedro J. / Carneiro, Fernando / Ramos, N. Viriato / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Development of LED-based illumination system for high-speed digital image correlation	828-834
Kresinsky, Felix / Leidich, Erhard / Hasse, Alexander	Different Failure Mechanisms in Keyed Shaft-Hub Connections under Dynamic Torque Load	162-169
Barros, Francisco / Sousa, Pedro J. / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Digital image correlation with a moving camera using structure from motion calibration	986-991
Sousa, Pedro J. / Barros, Francisco / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Displacement analysis of rotating RC helicopter blade using coupled CFD-FEA simulation and digital image correlation	812-821
Vetter, Sebastian / Leidich, Erhard / Ziaei, Masoud / Herrmann, Marcus / Hasse, Alexander	Durability of hypotrochoidal shaft-hub connections under rotating bending with static torsion	90-97
Okeke, C. P. / Brown, S. J. / Greenrod, M. T. / Lane, R. C. / Thite, A. N. / Durodola, J. F.	Dynamic response and fatigue life of Vacuum cast Polyurethane polymer material	596-601
Kouzoumis, Konstantinos / Hadley, Isabel / Mostafavi, Mahmoud	Effect of Biaxiality on Engineering Critical Assessments	347-354
Plekhov, O. / Panteleev, I. / Kostina, A. / Levin, L.	The effect of cryogenic suction on the monitoring data of ice barrier formation in a porous water-saturated soil	602-609
Lima, Eduardo A. / Martins, Thiago S. / Santos, Auteliano A.	Effect of manufacturing residual stress on the fatigue life of railway wheels for heavy-haul transportation	246-253
Branco, R. / Borrego, L. P. / Costa, J. D. / Antunes, F. V.	Effect of pre-strain on cyclic plastic behaviour of 7050-T6 aluminium alloy	177-182
Luksch, Jutta / Jung, Anne / Pauly, Christoph / Motz, Christian / Mücklich, Frank / Schaefer, Florian	Effect of Pretreatment on Interface Stability and Morphology of Ni/Al Hybrid Foams by in situ Microcantilever Fracture Experiment	206-213
Coules, H. E. / Horne, G. C. M.	Effects of residual stresses and localised strain-hardening on the fracture of ductile materials	934-941
Chakraborty, Joyraj / Katunin, Andrzej / Klikowicz, Piotr / Salamak, Marek	Embedded ultrasonic transmission sensors and signal processing techniques for structural change detection in the Gliwice bridge	387-394
Azuara, Guillermo / Barrera, Eduardo / Ruiz, Mariano	Enhanced algorithm for damage location on composite material	774-779
Borrego, L. P. / de Jesus, J. / Ferreira, J. A. M. / Costa, J. D. / Capela, C.	Environmental effect on the fatigue crack propagation of AM TiAl6V4 alloy specimens	562-567
Čápová, Kristýna / Velebil, Lukáš / Včelák, Jan / Dvořák, Milan / Sasek, Ladislav	Environmental Testing of a FBG Sensor System for Structural Health Monitoring of Building and Transport Structures	726-733
Janoušek, Jaromír / Scenini, Fabio / Volpe, Liberato / Hojná, Anna / Burke, M. Grace	Environmentally-Assisted Cracking of Type 316L Austenitic Stainless Steel in Low Pressure Hydrogen Steam Environments	440-447
Patwardhan, Pranav S. / Nalavde, Rajprasad A. / Kujawski, Daniel	An Estimation of Ramberg-Osgood Constants for Materials with and without Luder’s Strain Using Yield and Ultimate Strengths	750-757
Carrera, M. / Lopez-Crespo, P. / Tai, Y. H. / Yates, J. R. / Moreno, B. / Buslaps, T. / Withers, P. J.	Estimation of the plastic zone in fatigue through the thickness based on synchrotron diffraction data	872-877
Al-Salih, Hayder / Juno, Mary / Collins, William / Bennett, Caroline / Li, Jian / Sutley, Elaina J.	Evaluation of a Digital Image Correlation Bridge Inspection Methodology on Complex Distortion-Induced Fatigue Cracking	682-689
Unger, Reimar / Nocke, Andreas / Gerlach, Gerald / Cherif, Chokri	Evaluation of a novel test method for the determination of strain rate-dependent material properties of high-performance fibers	942-948
Custódio, João / Ribeiro, António Bettencourt	Evaluation of damage in concrete from structures affected by internal swelling reactions – A case study	80-89
Garg, Ashu / Raturi, Madhav / Bhattacharya, Anirban	Experimental and finite element analysis of progressive failure in friction stir welded AA6061-AA7075 joints	456-463
Liu, Haibao / Liu, Jun / Kaboglu, Cihan / Chai, Hui / Kong, Xiangshao / Blackman, Bamber R. K. / Kinloch, Anthony J. / Dear, John P.	Experimental and numerical studies on the behaviour of fibre-reinforced composites subjected to soft impact loading	992-1001
Sousa, Pedro J. / Barros, Francisco / Lobo, Paulo / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Experimental measurement of bridge deflection using Digital Image Correlation	806-811
Strungar, Elena M. / Feklistova, Evgenia V. / Babushkin, Andrey V. / Lobanov, Dmitrii S.	Experimental studies of 3D woven composites interweaving types effect on the mechanical properties of a polymer composite material	965-970
Zubova, Ekaterina M. / Strungar, Elena M. / Lobanov, Dmitriy S. / Wildemann, Valery E.	Experimental study of the damage accumulation in composite materials and ceramic coatings by using of acoustic emission technique	822-827
Tretyakova, Tatyana / Wildemann, Valery	Experimental study of the influence of strain-stress state on the jerky flow in metals and alloys	906-913
Jena, Pradipta Kumar / Kumar, K. Siva / Mandal, R. K. / Singh, A. K.	An experimental study on the fracture behavior of different aluminium alloys subjected to ballistic impact	957-964
Iordachescu, Mihaela / de Abreu, Maricely / Valiente, Andrés	Failure mechanisms in high-strength eutectoid and duplex stainless steel wires subjected to tensile and transverse loads	434-439
Trapp, Arvid / Makua, Mafake James / Wolfsteiner, Peter	Fatigue assessment of amplitude-modulated non-stationary random vibration loading	379-386
Bär, Jürgen / Metzger, Alexander / Pouvesle, Nico / Strauß, Bernhard / Bamsey, Nathan / Rohr, Thomas	Fatigue Behavior of AA2198 in Liquid Hydrogen	300-307
Baptista, R. / Guedes, M.	Fatigue behavior of different geometry scaffolds for bone replacement	539-546
Sabiston, Trevor / Li, Bin / Kang, Jidong / Liang, Jie / Engler-Pinto, Carlos	Fatigue behaviour of carbon/epoxy Non-Crimp Fabric composites for automotive applications	666-673
Baptista, C. A. R. P. / Lima, M. S. F. / Riva, R. / Siqueira, R. H. M.	Fatigue crack growth behavior of laser-shock processed aluminum alloy 2024-T3	324-330
Biswal, Romali / Mehmanparast, Ali	Fatigue damage analysis of offshore wind turbine monopile weldments	643-650
Lobanov, Dmitrii S. / Staroverov, Oleg A.	The fatigue durability GFRP under increased temperatures	651-657
Kepka, Miloslav / Václavík, Jaroslav / Chvojan, Jan	Fatigue life of a bus structure in normal operation and in accelerated testing on special tracks	44-50
Okeke, C. P. / Thite, A. N. / Durodola, J. F. / Greenrod, M. T.	Fatigue life prediction of Polymethyl methacrylate (PMMA) polymer under random vibration loading	589-595
Maciel, Ricardo / Bento, Tiago / Braga, Daniel F. O. / da Silva, Lucas F. M. / Moreira, Pedro M. G. P. / Infante, Virginia	Fatigue Performance of Friction Stir Weld-Bonded Al-Mg joints	949-956
Marciniak, Z. / Rozumek, D. / Brighenti, R. / Lesiuk, G. / Correia, J. A. F. O.	Fatigue tests of materials with the controlled energy parameter amplitude	503-508
Abuodeh, Omar R. / Abdalla, Jamal A. / Hawileh, Rami A.	The flexural behavior of bolting and bonding Aluminum Alloy plates to RC beams	395-402
Miarka, Petr / Seitl, Stanislav / Sucharda, Oldrich / Bílek, Vlastimil	Fracture Resistance of Alkali Activated Concrete under the Mixed Mode I/II Load Conditions	610-617
Farahani, Behzad V. / Barros, Francisco / Popescu, Mihai A. / Sousa, Pedro J. / Tavares, Paulo J. / Moreira, Pedro	Geometry Acquisition and 3D Modelling of a Wind Tower using a 3D Laser Scanning Technology	712-717
Gomes, F. / Xavier, J. / Koerber, H.	High strain rate compressive behaviour of wood on the transverse plane	900-905
Boukert, B. / Benkhedda, A. / Adda, E.B / Khodjet-Kesba, M.	Hygrothermal Stresses Analysis of Thick Composite Plates Using High Order Theory Under a Fick Concentration Distribution	37-43
Lopes, H. / Araújo dos Santos, J. V. / Katunin, A.	Identification of material properties of a laminated plate from measurements of natural frequencies and modal rotations	971-978
Doubrava, Radek / Oberthor, Martin / Vích, Ondřej	An improved technique for verification of high-speed impact simulation	190-197
Frankl, Siegfried / Pletz, Martin / Schuecker, Clara	Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites	51-57
Vyhlídal, Michal / Klusak, Jan	The influence of polygonal cavity on fracture behaviour of concrete	690-697
Smarzewski, Piotr	Influence of silica fume on mechanical and fracture properties of high performance concrete	5-12
Nunes, Pedro / Silva Lobo, Paulo	Influence of the SMA constitutive model on the longitudinal seismic response of RC bridges	624-631
Kujawski, Daniel	An Interactive Web-Based Fatigue Analysis Tool	742-749
Kec, Jan / Černý, Ivo / Poloch, Adam / Kyselá, Barbora / Poupa, Miloslav / Pavelková, Romana / Janovec, Jiří	Investigation of mechanical properties and microstructure of X60 line-pipe steel	230-237
Barile, Claudia / Casavola, Caterina / Pappalettera, Giovanni / Pappalettere, Carmine / Vimalathithan, Paramsamy Kannan	Investigation of Structural Integrity of Composite Materials using Wavelet Packet Transform	582-588
Nykyforchyn, Hryhoriy / Tsyrulnyk, Oleksandr / Zvirko, Olha	Laboratory method for simulating hydrogen assisted degradation of gas pipeline steels	568-575
Steinbauer, Pavel / Neusser, Zdenek / Bukovsky, Ivo / Neruda, Milos	Lighting Pole Health Monitoring for Predictive Maintenance	799-805
He, Feiyang / Khan, Muhammad A. / Zai, Behzad Ahmed	Material Mechanics of Crack Growth in Structural Dynamics	72-79
Lesiuk, Grzegorz / Sire, Stéphane / Ragueneau, Muriel / Correia, J. A. F. O. / Pedrosa, Bruno A. S. / de Jesus, A. M. P.	Mean stress effect and fatigue crack closure in material from old bridge erected in the late 19th century	198-205
Simson, Thomas / Koch, Jürgen / Rosenthal, Jakub / Kepka, Miloslav / Zetek, Miroslav / Zetková, Ivana / Wolf, Gerhard / Tomčík, Petr / Kulhánek, Jiři	Mechanical Properties of 18Ni-300 maraging steel manufactured by LPBF	843-849
Bridwell, Luke / Collins, William / Bennett, Caroline / Li, Jian	Mechanical Treatment of Crack-Arrest Holes Subjected to Distortion-Induced Fatigue	674-681
Brunner, Andreas J. / Potstada, Philipp / Sause, Markus G. R.	Microscopic damage size in fiber-reinforced polymer-matrix composites: Quantification approach via NDT-measurements	146-153
Papageorgiou, D. G. / Bravos, H. / Medrea, C.	Microscopic examination of a fan blade supporting system premature fractured	532-538
Dymáček, Petr / Svoboda, Jiří / Jirková, Hana / Stratil, Luděk / Horník, Vít	Microstructure evolution and creep strength of new-generation oxide dispersion strengthened alloys with high volume fraction of nano-oxides	427-433
Mousa, S. / Abd-Elhady, A. A. / Abu-Sinna, A. / Enab, T. / Alhazmi, W. H. / Sallam, H.	Mixed Mode Crack Growth in Functionally Graded Material Under Three-Point Bending	284-291
Morassi, Antonino / Dilena, Michele / Dell’Oste, Marta Fedele / Fernández-Sáez, José / Zaera, Ramón	Monitoring mass changes using nanoresonator sensors	98-104
Azevedo, C. R. F. / Padilha, A. F.	The most frequent failure causes in super ferritic stainless steels: are they really super?	331-338
Trampus, Péter / Krstelj, Vjera / Nardoni, Giuseppe	NDT integrity engineering – A new discipline	262-267
Konečná, Radomila / Nicoletto, Gianni / Riva, Enrica	Notch fatigue behavior of Inconel 718 produced by selective laser melting	138-145
Alhazmi, Waleed H. / Abd-Elhady, Amr A. / Mousa, Saeed / Atta, M. / Abu-Sinna, A. / Bafakeeh, O. / Sallam, H. E. M.	Notch Tensile Strength of Carbon Fiber/Epoxy Composite Plate with a Center Hole under Static and Cyclic Loading	292-299
Kwietniewski, Michał / Miedzińska, Danuta	Numerical Analysis of Auxetic Yarn with Composite Matrix Interaction	58-63
Moghaddam, Behrooz Tafazzoli / Hamedany, Ali Mahboob / Mehmanparast, Ali / Brennan, Feargal / Nikbin, Kamran / Davies, Catrin Mair	Numerical analysis of pitting corrosion fatigue in floating offshore wind turbine foundations	64-71
Rombach, G. A. / Faron, A.	Numerical analysis of shear crack propagation in a concrete beam without transverse reinforcement	766-773
Montejo, Salatiel Pérez / López, Pablo Ruiz / Mendoza, Gilberto Soto / Molina, Alejandra Armenta / García, Abraham Villanueva / Gómez, Luis H. Hernández	Numerical analysis of the BWR-5 beltline region containing a crack postulated for an extended period of operation	123-130
Camas, D. / Antunes, F. / Moreno, B. / Gonzalez-Herrera, A.	Numerical analysis of the influence of the last cycle scheme on plasticity induced crack closure	894-899
Formiga, J. / Sousa, L. / Infante, V.	Numerical and Experimental Analysis of the Suspension Connection Zone of a Formula Student Monocoque Chassis	886-893
Pascon, J. P. / Torres, M. A. S. / Baptista, C. A. R. P.	Numerical model for the stress field ahead of a crack in elastoplastic regime	411-418
Serovaev, Grigorii / Matveenko, Valerii / Kosheleva, Natalia / Fedorov, Andrey	Numerical modeling of the capillary in the Bragg grating area, ensuring uniaxial stress state of embedded fiber-optic strain sensor	371-378
Zhelnin, M. / Kostina, A. / Plekhov, O. / Panteleev, I. / Levin, L.	Numerical simulation of soil stability during artificial freezing	316-323
Kuželka, Jiří / Nesládek, Martin / Lutovinov, Maxim / Jurenka, Josef / Růžička, Milan / Rund, Martin / Měšťánek, Petr	Numerical Simulations of Fatigue Crack Growth in a Steam Turbine Rotor Blade Groove	780-787
Reheman, W. / Ståhle, P. / Kao-Walter, S.	On instabilities of growing bi-material interfaces	850-856
Singh, Anurag / Sguazzo, Carmen / Lima, Carlos F. R. A. C. / Santos, Luis M. N. B. F. / Reis, Jorge Matos / Moreira, Pedro M. G. P. / Tavares, Paulo J. S.	Oxidative Treatment of Multi-Walled Carbon Nanotubes and its Effect on the Mechanical and Electrical Properties of Green Epoxy based Nano-Composites	857-864
Babushkin, Andrey V. / Babushkina, Anna V. / Strungar, Elena M. / Staroverov, Oleg A. / Lobanov, Dmitrii S. / Temerova, Maria S. / Feklistova, Evgenia V.	Phenomenological characteristics structural features research obtained at fibrous plastics standard tests	658-665
Grong, Øystein / Sandnes, Lise / Berto, Filippo	Progress in Solid State Joining of Metals and Alloys	788-798
Kunz, Ludvík / Pokorný, Pavel / Konečná, Radomila / Nicoletto, Gianni	Propagation of long fatigue cracks in Ti6Al4V alloy produced by direct metal laser sintering	222-229
Matveenko, V. P. / Kosheleva, N. A. / Serovaev, G. S. / Voronkov, A. A.	Registration of local damage based on the use of fiber-optic strain sensors and numerical simulation results	363-370
Salim, Kennouche / Houssam, Abdelli / Belaid, Amrane / Brahim, Hami	Reinforcement of building plaster by waste plastic and glass	170-176
Kwietniewski, Michał / Miedzińska, Danuta	Review of Elastomeric Materials for Application to Composites Reinforced by Auxetics Fabrics	154-161
Lochan, Sharda / Mehmanparast, Ali / Wintle, John	A review of fatigue performance of bolted connections in offshore wind turbines	276-283
Ermakova, A. / Mehmanparast, A. / Ganguly, S.	A review of present status and challenges of using additive manufacturing technology for offshore wind applications	29-36
Chmelko,, V. / Biro, D.	Safety of pressure pipe operation with corrosive defect	520-525
Belmokre, Ahmed / Mihoubi, Mustapha Kamel / Santillán, David	Seepage and dam deformation analyses with statistical models: support vector regression machine and random forest	698-703
Mhanna, Haya H. / Hawileh, Rami A. / Abdalla, Jamal A.	Shear Strengthening of Reinforced Concrete Beams Using CFRP Wraps	214-221
Martins, T. / Infante, V. / Sousa, L. / Antunes, P. J. / Moura, A. M. / Serrano, B.	SHM TB30, Numerical Study of an Aircraft Structural Condition	878-885
Armaghani, Danial J. / Hatzigeorgiou, George D. / Karamani, Chrysoula / Skentou, Athanasia / Zoumpoulaki, Ioanna / Asteris, Panagiotis G.	Soft computing-based techniques for concrete beams shear strength	924-933
Baláž, Ivan / Koleková, Yvona / Moroczová, Lýdia	Stability Analysis of Compression Member on Elastic Supports	734-741
Marques, Ana Isabel / Morais, João / Santos, Carlos / Morais, Paulo / Veiga, Maria do Rosário	Static Elasticity Modulus Analysis of Coating Mortars	1002-1009
Ahmad, Shahnawaz / Suman, A. / Sidharth, T. / Pawar, Ganesh / Kumar, Vikas / Vyas, N. S.	Structural Integrity Analysis and Life Estimation of a Gas Turbine Bladed-Disc	758-765
Tretyakov, M. P. / Lobanov, D. S. / Wildemann, V. E.	Study of The Regularities of Postcritical Behavior and Failure of Specimens in the Tests of Composite Materials	865-871
Raturi, Madhav / Garg, Ashu / Bhattacharya, Anirban	Tensile strength and failure of dissimilar friction stir welded joints between 6061-T6 and 2014-T6 aluminum alloys	495-502
Fekete, Tamás	Towards a Generalized Methodology for Structural Integrity Calculations of Large-Scale Pressure Systems	464-471
de Abreu, Maricely / Iordachescu, Mihaela / Valiente, Andrés	Transverse load influence on tensile fatigue resistance of high-strength steel wires for structural applications in civil engineering	618-623
Abdalla, Jamal A. / Abu-Obeidah, Adi R. / Hawileh, Rami A.	Use of Aluminum Alloy Plates as Externally Bonded Shear Reinforcement for R/C Beams	403-410
Klusak, Jan / Seitl, Stanislav	Very high cycle fatigue tests of high strength steels S355 J0 and S355 J2	576-581
Hasegawa, Takanori / Saeki, Mao / Ogawa, Tetsuji / Nakano, Teppei	Vibration-Based Fault Detection for Flywheel Condition Monitoring	487-494

Informations
sur cette fiche
IssueID
60064
Publié(e) le:
04.12.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Procedia Structural Integrity - 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Procedia Structural Integrity - 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.