Procedia Structural Integrity - 2019

Publié:	2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Nohal, Libor / Mazal, Pavel / Vlasic, Frantisek / Svobodova, Marie	Acoustic Emission Response to Erosion-Corrosion and Creep Damage in Pipeline Systems	227-232
Chlup, Zdeněk / Cerny, Martin / Halasová, Martina / Strachota, Adam	Behaviour of Partially Pyrolysed Composite Reinforced by Fibres of Various Compositions	505-510
Luňák, Miroslav / Kusák, Ivo	Change in the Sensory Properties of Alkali Activated Slag Mortars	9-14
Azeez, Ahmed / Eriksson, Robert / Calmunger, Mattias	Characterisation of deformation and damage in a steam turbine steel subjected to low cycle fatigue	155-160
James, M. N. / Vasco-Olmo, J. M. / Díaz, F. A. / Antunes, F. V. / Bing, Yang / Huang, Yongfang	Characterisation of fatigue crack growth using the CJP model of crack tip fields or plastic CTOD	613-619
Kureš, Miroslav	A characterization of sliding vectors by dual numbers, some dual curves and the screw calculus	396-401
Umeno, Yoshitaka / Kubo, Atsushi / Albina, Jan-Michael	Coarse-grained molecular dynamics simulation of deformation and fracture in polycarbonate: Effect of loading mode, strain rate, temperature and molar mass	348-353
Vala, Jiří / Kozák, Vladislav	Computational analysis of crack formation and propagation in quasi-brittle fibre reinforced composites	328-333
Larisa, Stepanova / Sergey, Bronnikov	A computational study of the mixed-mode crack behavior by molecular dynamics method and the multi-parameter crack field description of classical fracture mechanics	322-327
Nikitin, I. S. / Nikitin, A. D. / Stratula, B. A.	Constitutive equations of the semi-microscopic theory of plasticity for a multiaxial stress state	119-124
Nikitin, I. S. / Burago, N. G. / Golubev, V. I. / Nikitin, A. D.	Continual models of layered and block media with slippage and delamination	125-130
Vojtek, Tomas / Pokorný, Pavel / Náhlík, Luboš / Herrero, Diego / Hutař, Pavel	Crack Closure in the Near-threshold Region in Metallic Materials	481-486
Machů, Zdeněk / Majer, Zdeněk / Hadaš, Zdeněk / Ševeček, Oldřich	Crack propagation analysis in multilayer piezoelectric energy harvester	535-540
Antunes, F. V. / Borges, M. F. / Marques, B. / Prates, P. / Branco, R.	Crack tip mechanisms: a numerical analysis	571-576
Zak, Stanislav / Pippan, Reinhard	Crack Tip Plasticity Influence on Cracks Approaching Cu-Si Interface	239-244
Polák, Jaroslav / Petráš, Roman	Cyclic plastic response and damage in superaustenitic steel in high temperature cycling with dwells and in thermomechanical cycling	275-280
Naimark, Oleg	Defects induced multiscale kinetics of damage-failure transition under very high cycle fatigue	245-250
Poduška, Jan / Dlhý, Pavol / Hutař, Pavel / Frank, Andreas / Kučera, Jaroslav / Sadílek, Jiří / Náhlík, Luboš	Design of plastic pipes considering content of recycled material	293-298
Skotarek, C. / Markstaedter, K. / Brueckner-Foit, A. / Rienaecker, A.	Determination of crack initiation in an interior cold-weld by combining reverse engineering and digital image correlation analysis	463-468
Shanyavskiy, A. A. / Banov, M. D.	Durability diagnostics of turbine blades based on non-destructive acoustic emission testing	57-62
Calmunger, Mattias / Eriksson, Robert / Lindström, Thomas / Leidermark, Daniel	Effect of additive manufacturing on fatigue crack propagation of a gas turbine superalloy	215-220
Petráš, Roman / Polák, Jaroslav	Effect of an environment in stainless steel on the damage mechanisms under LCF conditions	209-214
Sinev, I. O. / Tyutin, M. R. / Botvina, L. R.	The Effect of Stress Concentration and Material Structure on the Kinetics of Damage Accumulation	565-570
Babinský, Tomáš / Polák, Jaroslav	Effective and internal stresses in 713LC and Rene 41 superalloys using analysis of the hysteresis loop shape	523-528
Materna, Aleš / Haušild, Petr / Ondráček, Jan / Adámek, Jan / Petelová, Petra	Effects of cold-working and annealing at 700 °C on hardness of 08Ch18N10T steel	425-430
Malikova, Lucie / Vavro, Leona / Vavro, Martin / Keršner, Zbynĕk	Evaluation of fracture response of Silesian granite specimens via Effective Crack Model approach and finite element analysis	487-492
Čelko, Ladislav / Jech, David / Tkachenko, Serhii / Komarov, Pavel / Remešová, Michaela / Slámečka, Karel / Ctibor, Pavel	Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack	360-365
Poczklán, Ladislav / Mazánová, Veronika / Gamanov, Štěpán / Kruml, Tomáš	Fatigue crack growth rate in axial, torsional and multiaxial mode in 316L austenitic steel	269-274
Shanyavskiy, A. A. / Soldatenkov, A. P.	The fatigue limit of metals as a characteristic of the multimodal fatigue life distribution for structural materials	63-68
Černý, Ivo / Kec, Jan / Němeček, Stanislav / Poloch, Adam / Černá, Marie	Fatigue properties and damage mechanisms of components manufactured by laser additive welding of H13 on S355 steel	493-498
Horník, Vít / Fintová, Stanislava / Šmíd, Miroslav / Hutař, Pavel / Hrbáček, Karel / Kunz, Ludvík	Fatigue properties of B1914 superalloy at high temperatures	191-196
Tinoco, Hector A. / Cardona, Carlos I. / Vojtek, Tomas / Hutař, Pavel	Finite element analysis of crack-tip opening displacement and plastic zones considering the cyclic material behaviour	529-534
Kubo, Atsushi / Umeno, Yoshitaka	First-Principles Analysis of Deformation and Fracture Properties of Semiconductors	372-377
Sedmak, Aleksandar / Čolić, Katarina	Fracture and Fatigue Behaviour of Implants Made of Ti Alloys	45-50
Nath, Atri / Barai, Sudhirkumar V. / Ray, Kalyan Kumar	A Generalized Model towards Predicting Monotonic and Cyclic Deformation Behavior of Cyclically Stable Materials	263-268
Melin, Solveig / Hansson, Per / Ahadi, Aylin	Grain boundary influence on the mechanical response to tensile loading for nanosized Cu beams modelled by MD simulations	137-142
Nowak-Michta, Aneta	Impact analysis of air-entraining and superplasticizing admixtures on concrete compressive strength	77-82
Wärner, Hugo / Eriksson, Robert / Chai, Guocai / Moverare, Johan / Johansson, Sten / Calmunger, Mattias	Influence of ageing on thermomechanical fatigue of austenitic stainless steels	354-359
Jech, David / Čelko, Ladislav / Remešová, Michaela / Slámečka, Karel / Ctibor, Pavel	Influence of isothermal oxidation on microstructure of YSZ and Mullite-YSZ thermal barrier coatings	378-383
Camas, D. / Antunes, F. / Lopez-Crespo, P. / Gonzalez-Herrera, A.	Influence of plastic wake length on results of 3D numerical modelling of plasticity induced crack closure	607-612
Nasiłowska, Barbara / Bogusz, Paweł / Skrzeczanowski, Wojciech	The influence of shot peening on structure and mechanical properties of 5754 aluminium alloy joints welded with TIG method	583-588
Artamonov, M. A. / Nemtsev, D. V. / Medentsov, V. E. / Solovyev, V. S.	The Influence of Temperature and Stress Cycle Asymmetry at Fatigue Cracks Initiation and Propagation in Cylindrical Specimens of Ni-based Alloy EP741NP	257-262
Ševeček, Oldřich / Papšík, Roman / Majer, Zdeněk / Kotoul, Michal	Influence of the cell geometry on the tensile strength of open-cell ceramic foams	553-558
Máthis, Kristián / Drozdenko, Daria / Čapek, Jan	Influence of the solute concentration on twinning-detwinning process in Mg-Al alloys	51-56
Nasiłowska, Barbara / Bogdanowicz, Zdzisław	Initiation and development of 1.4539 austenitic steel welded joints made with TIG method and with laser beam	577-582
Horník, Vít / Fintová, Stanislava / Šmíd, Miroslav / Hutař, Pavel / Hrbáček, Karel / Kunz, Ludvík	Interaction of fatigue and creep in MAR-M 247 superalloy	197-202
Tyutin, M. R. / Botvina, L. R. / Levin, V. P. / Sinev, I. O.	Interrelation between Mechanical, Physical and Damage Parameters at Fracture of Steels	559-564
Majerík, Jozef / Barényi, Igor / Eckert, Maroš	Investigation of mechanical properties of hard finish turned and grinded surfaces	541-546
Dallaev, Rashid / Papež, Nikola / Sobola, Dinara / Ramazanov, Shikhgasan / Sedlák, Petr	Investigation of structure of AlN thin films using Fourier-transform infrared spectroscopy	601-606
Artamonov, M. A. / Trunkin, I. N. / Ovcharov, A. V. / Vasiliev, A. L.	The investigation of the of fatigue crack growth mechanism in powder metallurgy Ni-based superalloy	251-256
Kubík, Petr / Petruška, Jindřich / Vosynek, Petr / Šebek, František	Lode dependent plasticity in the prediction of deformation states of tensile specimens	15-20
Azeez, Ahmed / Eriksson, Robert / Calmunger, Mattias / Lindström, Stefan B. / Simonsson, Kjell	Low cycle fatigue modelling of a steam turbine rotor steel	149-154
Mokryakov, Viacheslav	Maximal stresses of the longitudinal Pochhammer – Chree waves	143-148
Haušild, Petr / Čech, Jaroslav / Bouček, Václav / Karlík, Miroslav / Nová, Kateřina / Průša, Filip / Novák, Pavel / Kopeček, Jaromír	Mechanical Alloying of Fe-Al-Si Intermetallic Compounds Using Pure and Pre-Alloyed Powders	179-184
Šulák, Ivo / Man, Jiří / Obrtlík, Karel	Mechanisms of fatigue crack initiation and early propagation in cyclically strained nickel superalloy	161-166
Khatibi, Golta / Kirchgaßner, Martin	A method for evaluation of weld overlays exposed to combined wear and very high cycle fatigue conditions	475-480
Dlhý, Pavol / Poduška, Jan / Pokorný, Pavel / Náhlík, Luboš / Fajkoš, Rostislav / Hutař, Pavel	Methodology for estimation of residual stresses in hardened railway axle	185-190
Gerbe, Sascha / Tenkamp, Jochen / Scherbring, Steffen / Bleicher, Kevin / Krupp, Ulrich / Michels, Wilhelm / Walther, Frank	Microstructural influences on the fatigue crack initiation and propagation mechanisms in hypo-eutectic Al-Si cast alloys	511-516
Papež, Nikola / Dallaev, Rashid / Sobola, Dinara / Macků, Robert / Škarvada, Pavel	Microstructural investigation of defects in photovoltaic cells by the electron beam-induced current method	595-600
Král, Petr / Kvapilová, Marie / Sklenička, Václav / Zýka, Jiří / Čmakal, Josef / Hrbáček, Karel	Microstructure and damage processes in a nickel-based alloy exposed to molten glass	287-292
Pinc, Jan / Čapek, Jaroslav / Kubásek, Jiří / Veřtát, Petr / Hosová, Klára	Microstructure and mechanical properties of the potentially biodegradable ternary system Zn-Mg0.8-Ca0.2	21-26
Teraud, W. / Mamonov, A.	The microstructure study of the hydrogenated titanium specimens tested at high temperature creep for long-term tensile strength	390-395
Volkov, I. A. / Igumnov, L. A. / Modin, I. A. / Boev, E. V.	A model of damaged media for describing a creep-induced damage accumulation process	281-286
Balueva, Alla V. / Dashevskiy, Ilia N. / Todebush, Patricia / Campbell, Chasen	Modeling Bonding Energy in Novel Bio-active Nano Coatings on Dental Implants	173-178
Volkov, I. A. / Igumnov, L. A. / Litvinchuk, S.Yu. / Boev, A. V.	Modeling fatigue life of structural materials under block-type nonsymmetrical loading	316-321
Opěla, Petr / Schindler, Ivo / Očenášek, Vladivoj / Kawulok, Petr / Kawulok, Rostislav / Rusz, Stanislav	Modelling the Hot Deformation Behavior of AlSi1MgMn Alloy via Flow Stress Models Utilizing Intelligent Algorithms	221-226
Pustaić, Dragan / Lovrenić-Jugović, Martina	More accurate mathematical description in the assessment of plastic zone magnitude around the crack tip	27-32
Dlouhy, Ivo / Tatarko, Peter / Bertolla, Luca / Chlup, Zdeněk	Nano-fillers (nanotubes, nanosheets): do they toughen brittle matrices?	431-438
Kotrechko, Sergiy / Timoshevskii, Andrii / Kolyvoshko, Eugene / Matviychuk, Yuriy / Stetsenko, Nataliya	Nanodevice lifetime prediction – the challenge for nano- and micromechanics	310-315
Rogante, M. / Buhagiar, J. / Cassar, G. / Debono, M. / Lebedev, V. / Mikula, P. / Ryukhtin, V.	Neutron investigation of Nitinol stents and massive samples before and after PIRAC coating	95-100
Hrstka, Miroslav / Kotoul, Michal / Profant, Tomas	Notch Tip Singularities of Elastic Piezoelectric Bi-materials	419-424
Oplt, Tomáš / Hutař, Pavel / Pokorný, Pavel / Náhlík, Luboš / Berto, Filippo	Numerical evaluation of plasticity induced crack closure in 3D structures	101-106
Jiang, Keng / Bezold, Alexander / Broeckmann, Christoph	Numerical modeling of the progressive damage in the microstructure of WC-Co hardmetals under fatigue loading	451-456
Nakai, Yoshikazu / Shiozawa, Daiki / Kikuchi, Shoichi / Nakagawa, Yuki / Asayama, Kaito	Observations of Twinning and Detwinning in Magnesium Alloy by Synchrotron Radiation DCT and EBSD	83-88
Jedlička, Michal / Rek, Václav / Vala, Jiří	On automation of XFEM computations considering general shapes of cracks in terms of the stress analysis of spatial structures	445-450
Lederer, Martin / Kotas, Agnieszka Betwar / Khatibi, Golta / Danninger, Herbert	On crack propagation in homogeneous and composite materials under mixed mode loading conditions	203-208
Konečná, Radomila / Nicoletto, Gianni	On the link between as-built surface quality and fatigue behavior of additively manufactured Inconel 718	384-389
Bacaicoa, I. / Luetje, M. / Zeismann, F. / Geisert, A. / Fehlbier, M. / Brueckner-Foit, A.	On the role of Fe-content on the damage behavior of an Al-Si-Cu alloy	33-38
Wang, Jiaming / Jivkov, Andrey P. / Engelberg, Dirk L. / Li, Q. M.	Parametric Study of Cohesive ITZ in Meso-scale Concrete Model	167-172
Das, Gour P. / Raghuvanshi, Parul R. / Bhattacharya, Amrita	Phonons and lattice thermal conductivities of graphene family	334-341
Jivkov, A. P. / Ford, M. / Yankova, M. / Sarzosa, D. / Ruggieri, C.	Progress and challenges with local approaches to cleavage fracture	39-44
Chlup, Zdeněk / Drdlík, Daniel / Fides, Martin / Kovalcikova, Alexandra / Hadraba, Hynek	Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation	499-504
Lauschmann, Hynek / Tesař, Karel / Jiroušková, Kateřina	Quantitative fractography of fatigue cracks: a new solution in 3D	107-112
Gurovich, B. A. / Kuleshov, D. A. / Maltsev, D. A. / Chugunov, O. K. / Frolov, A. S. / Shtrombakh, Ya I.	Radiation degradation mechanisms of reactor graphites properties	589-594
Karolczuk, A. / Papuga, J.	Recent progress in the application of multiaxial fatigue criteria to lifetime calculations	69-76
Lenart, Małgorzata / Gruszczyński, Maciej	The research of mortars shrinkage made with reclaimed aggregate	113-118
Domagała, Lucyna	Resistance of insulating-structural concretes to high temperature	342-347
Ray, Ayan / Roy, Ushasi / Kumari, Mamta / Ray, Kalyan Kumar	The Role of Substructural Features on the Deformation and Fracture Behavior of BCC and FCC High Entropy Alloys	299-304
Krupp, Ulrich / Koschella, Kevin / Giertler, Alexander	The significance of grain size, segregations and inclusions for the very high cycle fatigue (VHCF) behavior of tempered martensitic steels	517-522
Barényi, Igor / Majerík, Jozef / Krbaťa, Michal	Structure evolution of 33NiCrMoV15 steel after its processing by various quenching conditions	547-552
Zhukov, Anton / Barakhtin, Boris / Shakirov, Ivan / Bobyr, Vitaliy / Kuznetsov, Pavel	The Structure of Iron Powder Aggregation Obtained by Selective Laser Melting	305-309
Nikitin, I. S. / Burago, N. G. / Nikitin, A. D. / Stratula, B. A.	Study of a multiaxial cyclic loading with determination of a critical plane for arbitrary phase shifts	131-136
Ohnišťová, Petra / Píška, Miroslav / Dluhoš, Jiří / Horníková, Jana / Šandera, Pavel / Petrenec, Martin	A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading	469-474
Petrova, Vera / Schmauder, Siegfried	A theoretical model for the study of thermal fracture of functionally graded thermal barrier coatings	407-412
Slámečka, Karel / Jech, David / Klakurková, Lenka / Tkachenko, Serhii / Remešová, Michaela / Gejdoš, Pavel / Čelko, Ladislav	Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats	439-444
Pratama, K. / Kunz, F. / Lindner, L. / Schmauch, J. / Mücklich, F. / Motz, C.	Thermal stability, phase decomposition, and micro-fatigue properties of pulsed electrodeposited nanocrystalline Co-Cu	366-371
Shayanfard, Pejman / Heller, Ludek / Šandera, Pavel / Sittner, Petr	Thermomechanically transforming Notched NiTi Thin ribbon: Effect of Martensitic Transformation on Stress Gradients	620-625
Kotrechko, Sergiy / Zatsarna, Oleksandra / Kozák, Vladislav / Dlouhy, Ivo	Threshold fracture stress: theory and application	413-418
Nordström, Joakim / Siriki, Raveendra / Calmunger, Mattias / Moverare, Johan / Chai, Guocai	TWIP and Fracture Behavior in the Superalloy 625 at Room and Cryogenic Temperatures	457-462
Paidar, Václav	Two BCC-phases in refractory high entropy alloys	402-406
Kluger, Krzysztof / Karolczuk, Aleksander / Robak, Grzegorz	Validation of multiaxial fatigue criteria application to lifetime calculation of S355 steel under cyclic bending-torsion loading	89-94
Čapek, Jaroslav / Pinc, Jan / Kubásek, Jiří / Molnárová, Orsolya / Maňák, Jan / Drahokoupil, Jan	ZnMg0.8Ca/Sr0.2 ternary alloys – the influence of the third element on material properties	3-8

Informations
sur cette fiche
IssueID
60062
Publié(e) le:
10.01.2022
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Procedia Structural Integrity - 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Procedia Structural Integrity - 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.