Journal of Building Engineering - mars 2019

Publié:	mars 2019

Auteur(s)	Titre	Page(s)
Bhatia, Aviruch / Sangireddy, Sai Abhilash Reddy / Garg, Vishal	An approach to calculate the equivalent solar heat gain coefficient of glass windows with fixed and dynamic shading in tropical climates	90-100
So, Albert / Al-Sharif, Lutfi	Calculation of the elevator round-trip time under destination group control using offline batch allocations and real-time allocations	549-561
Trujillo, Víctor Manuel Sánchez / Herrera, Raúl González / Nolasco, Gabriel Castañeda / Lara, Carlos Manuel García / Carboney, Jorge Alfredo Aguilar	Characterization of pathologies in housing structures. A case study in the city of Tuxtla Gutierrez, Chiapas, Mexico	539-548
Andriamamonjy, Ando / Saelens, Dirk / Klein, Ralf	A combined scientometric and conventional literature review to grasp the entire BIM knowledge and its integration with energy simulation	513-527
Cehlin, Mathias / Karimipanah, Taghi / Larsson, Ulf / Ameen, Arman	Comparing thermal comfort and air quality performance of two active chilled beam systems in an open-plan office	56-65
Al-janabi, Ali / Kavgic, Miroslava / Mohammadzadeh, Ali / Azzouz, Afaf	Comparison of EnergyPlus and IES to model a complex university building using three scenarios: Free-floating, ideal air load system, and detailed	262-280
Cordon, Heloísa Cristina Fernandes / Cagnoni, Felipe Carvalho / Ferreira, Fabio Furlan	Comparison of physical and mechanical properties of civil construction plaster and recycled waste gypsum from São Paulo, Brazil	504-512
Thamboo, Julian Ajith / Dhanasekar, Manicka	Correlation between the performance of solid masonry prisms and wallettes under compression	429-438
Safhi, Amine el Mahdi / Benzerzour, Mahfoud / Rivard, Patrice / Abriak, Nor-Edine / Ennahal, Ilyass	Development of self-compacting mortars based on treated marine sediments	252-261
Stockdale, Gabriel / Milani, Gabriele	Diagram based assessment strategy for first-order analysis of masonry arches	122-129
Silva, A. / de Brito, J.	Do we need a buildings' inspection, diagnosis and service life prediction software?	335-348
Ahmed, Shafayet / Arocho, Ingrid	Emission of particulate matters during construction: A comparative study on a Cross Laminated Timber (CLT) and a steel building construction project	281-294
Yin, Peng / Pate, Michael B.	An energy and life-cycle cost comparison of residential PSC and ECM blower systems operating at excess pressures due to restrictive ducts	305-313
Martínez, Sandra / Erkoreka, Aitor / Eguía, Pablo / Granada, Enrique / Febrero, Lara	Energy characterization of a PASLINK test cell with a gravel covered roof using a novel methodology: Sensitivity analysis and Bayesian calibration	1-11
Itani, Mariam / Bachnak, Rana / Ghaddar, Nesreen / Ghali, Kamel	Evaluating performance of hybrid PCM-fan and hybrid PCM-desiccant vests in moderate and hot climates	383-396
Malakouti, Masoud / Faizi, Mohsen / Hosseini, Seyed-Bagher / Norouzian-Maleki, Saeid	Evaluation of flexibility components for improving housing quality using fuzzy TOPSIS method	154-160
Buruberri, L. H. / Tobaldi, D. M. / Caetano, A. / Seabra, M. P. / Labrincha, J. A.	Evaluation of reactive Si and Al amounts in various geopolymer precursors by a simple method	48-55
Kumirai, T. / Dirker, J. / Meyer, J.	Experimental analysis for thermal storage performance of three types of plate encapsulated phase change materials in air heat exchangers for ventilation applications	75-89
Martínez, Marcos / Atamturktur, Sez	Experimental and numerical evaluation of reinforced dry-stacked concrete masonry walls	181-191
Nitesh, K. J. N. Sai / Venkateswara Rao, S. / Kumar, P. Rathish	An experimental investigation on torsional behaviour of recycled aggregate based steel fiber reinforced self compacting concrete	242-251
El-Didamony, Hamdy / Amer, Ahmed A. / Mohammed, Mona S. / El-Hakim, Mahmmoud Abd	Fabrication and properties of autoclaved aerated concrete containing agriculture and industrial solid wastes	528-538
Yasin, Modar / Scheidemantel, Eva / Klinker, Felix / Weinläder, Helmut / Weismann, Stephan	Generation of a simulation model for chilled PCM ceilings in TRNSYS and validation with real scale building data	372-382
Mijorski, Sergey / Cammelli, Stefano / Green, Johnathan	A hybrid approach for the assessment of outdoor thermal comfort	147-153
Vares, Sirje / Häkkinen, Tarja / Ketomäki, Jaakko / Shemeikka, Jari / Jung, Nusrat	Impact of renewable energy technologies on the embodied and operational GHG emissions of a nearly zero energy building	439-450
Jazaeri, Javad / Gordon, Robert L. / Alpcan, Tansu	Influence of building envelopes, climates, and occupancy patterns on residential HVAC demand	33-47
Zhang, Guohui / Li, Xianting / Shi, Wenxing / Wang, Baolong / Cao, Yang	Influence of occupant behavior on the energy performance of variable refrigerant flow systems for office buildings: A case study	327-334
Pan, Wang / Turrin, Michela / Louter, Christian / Sariyildiz, Sevil / Sun, Yimin	Integrating multi-functional space and long-span structure in the early design stage of indoor sports arenas by using parametric modelling and multi-objective optimization	464-485
Alsayed, Mohammed F. / Tayeh, Rawan A.	Life cycle cost analysis for determining optimal insulation thickness in Palestinian buildings	101-112
Seifi, Sahar / Sebaibi, Nassim / Levacher, Daniel / Boutouil, Mohamed	Mechanical performance of a dry mortar without cement, based on paper fly ash and blast furnace slag	113-121
Ji, Ke / Cai, Wenjian / Zhang, Xin / Wu, Bingjie / Ou, Xianhua	Modeling and validation of an active chilled beam terminal unit	161-170
Najimi, Meysam / Ghafoori, Nader / Nikoo, Mehdi	Modeling chloride penetration in self-consolidating concrete using artificial neural network combined with artificial bee colony algorithm	216-226
Naghavi, Mohammad / Rahnavard, Rohola / Thomas, Robert J. / Malekinejad, Mohsen	Numerical evaluation of the hysteretic behavior of concentrically braced frames and buckling restrained brace frame systems	415-428
Mittal, Hemant / Sharma, Ashutosh / Gairola, Ajay	Numerical simulation of pedestrian level wind flow around buildings: Effect of corner modification and orientation	314-326
Sheth, Deep V. / Saha, Sandip K.	Numerical study of thermal management of data centre using porous medium approach	200-215
Ghahramani, Ali / Pantelic, Jovan / Vannucci, Matthew / Pistore, Lorenza / Liu, Shichao / Gilligan, Brian / Alyasin, Soheila / Arens, Edward / Kampshire, Kevin / Sternberg, Esther	Personal CO2 bubble: Context-dependent variations and wearable sensors usability	295-304
Jang, Jihoon / Baek, Jumi / Leigh, Seung-Bok	Prediction of optimum heating timing based on artificial neural network by utilizing BEMS data	66-74
Ferwati, M. Salim / Al Saeed, Mahmoud / Shafaghat, Arezou / Keyvanfar, Ali	Qatar Sustainability Assessment System (QSAS)-Neighborhood Development (ND) Assessment Model: Coupling green urban planning and green building design	171-180
Sangi, Roozbeh / Kümpel, Alexander / Müller, Dirk	Real-life implementation of a linear model predictive control in a building energy system	451-463
Li, Xiuming / Zhao, Tianyi / Fan, Pengdan / Zhang, Jili	Rule-based fuzzy control method for static pressure reset using improved Mamdani model in VAV systems	192-199
Santos, S. / da Silva, P. R. / de Brito, J.	Self-compacting concrete with recycled aggregates – A literature review	349-371
Shi, Qingxuan / Zhang, Feng	Simplified calculation of shear lag effect for high-rise diagrid tube structures	486-495
Kareem, Kamaran Mohammed / Pantò, Bartolomeo	Simplified macro-modelling strategies for the seismic assessment of non-ductile infilled frames: a critical appraisal	397-414
Bedon, Chiara / Louter, Christian	Structural glass beams with embedded GFRP, CFRP or steel reinforcement rods: Comparative experimental, analytical and numerical investigations	227-241
Alaneme, Kenneth Kanayo / Okotete, Eloho Anita / Anaele, Justus Uchenna	Structural vibration mitigation – a concise review of the capabilities and applications of Cu and Fe based shape memory alloys in civil structures	22-32
Faruque Hossain, Md.	Sustainable technology for energy and environmental benign building design	130-139
Almumar, Mohamed M. Saeed	Understanding the environmental performance of the Iraqi traditional courtyard house, Is there an order of façades orientation in randomly oriented land plots?	140-146
Sevim, Umur Korkut / Ozturk, Murat / Onturk, Sadettin / Bankir, Muzeyyen Balcikanli	Utilization of boron waste borogypsum in mortar	496-503
Leccese, Francesco / Salvadori, Giacomo / Barlit, Maksym	Ventilated flat roofs: A simplified model to assess their hygrothermal behaviour	12-21

Auteur(s)

Titre

Page(s)

Bhatia, Aviruch / Sangireddy, Sai Abhilash Reddy / Garg, Vishal

An approach to calculate the equivalent solar heat gain coefficient of glass windows with fixed and dynamic shading in tropical climates

90-100

So, Albert / Al-Sharif, Lutfi

Calculation of the elevator round-trip time under destination group control using offline batch allocations and real-time allocations

549-561

Trujillo, Víctor Manuel Sánchez / Herrera, Raúl González / Nolasco, Gabriel Castañeda / Lara, Carlos Manuel García / Carboney, Jorge Alfredo Aguilar

Characterization of pathologies in housing structures. A case study in the city of Tuxtla Gutierrez, Chiapas, Mexico

539-548

Andriamamonjy, Ando / Saelens, Dirk / Klein, Ralf

A combined scientometric and conventional literature review to grasp the entire BIM knowledge and its integration with energy simulation

513-527

Cehlin, Mathias / Karimipanah, Taghi / Larsson, Ulf / Ameen, Arman

Comparing thermal comfort and air quality performance of two active chilled beam systems in an open-plan office

56-65

Al-janabi, Ali / Kavgic, Miroslava / Mohammadzadeh, Ali / Azzouz, Afaf

Comparison of EnergyPlus and IES to model a complex university building using three scenarios: Free-floating, ideal air load system, and detailed

262-280

Cordon, Heloísa Cristina Fernandes / Cagnoni, Felipe Carvalho / Ferreira, Fabio Furlan

Comparison of physical and mechanical properties of civil construction plaster and recycled waste gypsum from São Paulo, Brazil

504-512

Thamboo, Julian Ajith / Dhanasekar, Manicka

Correlation between the performance of solid masonry prisms and wallettes under compression

429-438

Safhi, Amine el Mahdi / Benzerzour, Mahfoud / Rivard, Patrice / Abriak, Nor-Edine / Ennahal, Ilyass

Development of self-compacting mortars based on treated marine sediments

252-261

Stockdale, Gabriel / Milani, Gabriele

Diagram based assessment strategy for first-order analysis of masonry arches

122-129

Silva, A. / de Brito, J.

Do we need a buildings' inspection, diagnosis and service life prediction software?

335-348

Ahmed, Shafayet / Arocho, Ingrid

Emission of particulate matters during construction: A comparative study on a Cross Laminated Timber (CLT) and a steel building construction project

281-294

Yin, Peng / Pate, Michael B.

An energy and life-cycle cost comparison of residential PSC and ECM blower systems operating at excess pressures due to restrictive ducts

305-313

Martínez, Sandra / Erkoreka, Aitor / Eguía, Pablo / Granada, Enrique / Febrero, Lara

Energy characterization of a PASLINK test cell with a gravel covered roof using a novel methodology: Sensitivity analysis and Bayesian calibration

1-11

Itani, Mariam / Bachnak, Rana / Ghaddar, Nesreen / Ghali, Kamel

Evaluating performance of hybrid PCM-fan and hybrid PCM-desiccant vests in moderate and hot climates

383-396

Malakouti, Masoud / Faizi, Mohsen / Hosseini, Seyed-Bagher / Norouzian-Maleki, Saeid

Evaluation of flexibility components for improving housing quality using fuzzy TOPSIS method

154-160

Buruberri, L. H. / Tobaldi, D. M. / Caetano, A. / Seabra, M. P. / Labrincha, J. A.

Evaluation of reactive Si and Al amounts in various geopolymer precursors by a simple method

48-55

Kumirai, T. / Dirker, J. / Meyer, J.

Experimental analysis for thermal storage performance of three types of plate encapsulated phase change materials in air heat exchangers for ventilation applications

75-89

Martínez, Marcos / Atamturktur, Sez

Experimental and numerical evaluation of reinforced dry-stacked concrete masonry walls

181-191

Nitesh, K. J. N. Sai / Venkateswara Rao, S. / Kumar, P. Rathish

An experimental investigation on torsional behaviour of recycled aggregate based steel fiber reinforced self compacting concrete

242-251

El-Didamony, Hamdy / Amer, Ahmed A. / Mohammed, Mona S. / El-Hakim, Mahmmoud Abd

Fabrication and properties of autoclaved aerated concrete containing agriculture and industrial solid wastes

528-538

Yasin, Modar / Scheidemantel, Eva / Klinker, Felix / Weinläder, Helmut / Weismann, Stephan

Generation of a simulation model for chilled PCM ceilings in TRNSYS and validation with real scale building data

372-382

Mijorski, Sergey / Cammelli, Stefano / Green, Johnathan

A hybrid approach for the assessment of outdoor thermal comfort

147-153

Vares, Sirje / Häkkinen, Tarja / Ketomäki, Jaakko / Shemeikka, Jari / Jung, Nusrat

Impact of renewable energy technologies on the embodied and operational GHG emissions of a nearly zero energy building

439-450

Jazaeri, Javad / Gordon, Robert L. / Alpcan, Tansu

Influence of building envelopes, climates, and occupancy patterns on residential HVAC demand

33-47

Zhang, Guohui / Li, Xianting / Shi, Wenxing / Wang, Baolong / Cao, Yang

Influence of occupant behavior on the energy performance of variable refrigerant flow systems for office buildings: A case study

327-334

Pan, Wang / Turrin, Michela / Louter, Christian / Sariyildiz, Sevil / Sun, Yimin

Integrating multi-functional space and long-span structure in the early design stage of indoor sports arenas by using parametric modelling and multi-objective optimization

464-485

Alsayed, Mohammed F. / Tayeh, Rawan A.

Life cycle cost analysis for determining optimal insulation thickness in Palestinian buildings

101-112

Seifi, Sahar / Sebaibi, Nassim / Levacher, Daniel / Boutouil, Mohamed

Mechanical performance of a dry mortar without cement, based on paper fly ash and blast furnace slag

113-121

Ji, Ke / Cai, Wenjian / Zhang, Xin / Wu, Bingjie / Ou, Xianhua

Modeling and validation of an active chilled beam terminal unit

161-170

Najimi, Meysam / Ghafoori, Nader / Nikoo, Mehdi

Modeling chloride penetration in self-consolidating concrete using artificial neural network combined with artificial bee colony algorithm

216-226

Naghavi, Mohammad / Rahnavard, Rohola / Thomas, Robert J. / Malekinejad, Mohsen

Numerical evaluation of the hysteretic behavior of concentrically braced frames and buckling restrained brace frame systems

415-428

Mittal, Hemant / Sharma, Ashutosh / Gairola, Ajay

Numerical simulation of pedestrian level wind flow around buildings: Effect of corner modification and orientation

314-326

Sheth, Deep V. / Saha, Sandip K.

Numerical study of thermal management of data centre using porous medium approach

200-215

Ghahramani, Ali / Pantelic, Jovan / Vannucci, Matthew / Pistore, Lorenza / Liu, Shichao / Gilligan, Brian / Alyasin, Soheila / Arens, Edward / Kampshire, Kevin / Sternberg, Esther

Personal CO2 bubble: Context-dependent variations and wearable sensors usability

295-304

Jang, Jihoon / Baek, Jumi / Leigh, Seung-Bok

Prediction of optimum heating timing based on artificial neural network by utilizing BEMS data

66-74

Ferwati, M. Salim / Al Saeed, Mahmoud / Shafaghat, Arezou / Keyvanfar, Ali

Qatar Sustainability Assessment System (QSAS)-Neighborhood Development (ND) Assessment Model: Coupling green urban planning and green building design

171-180

Sangi, Roozbeh / Kümpel, Alexander / Müller, Dirk

Real-life implementation of a linear model predictive control in a building energy system

451-463

Li, Xiuming / Zhao, Tianyi / Fan, Pengdan / Zhang, Jili