Journal of Building Engineering - mars 2016

Publié:	mars 2016

Auteur(s)	Titre	Page(s)
Aly, Aly-Mousaad / Bresowar, Joseph	Aerodynamic mitigation of wind-induced uplift forces on low-rise buildings: A comparative study	267-276
Fernandes, Claribel / de Brito, Jorge / Cruz, Carlos Oliveira	Architectural integration of ETICS in building rehabilitation	178-184
Quagliarini, Enrico / Monni, Francesco / Bondioli, Federica / Lenci, Stefano	Basalt fiber ropes and rods: Durability tests for their use in building engineering	142-150
Rossi, S. / Fedel, M. / Petrolli, S. / Deflorian, F.	Behaviour of different removers on permanent anti-graffiti organic coatings	104-113
Vizi, Gergely Norbert / Vandenbosch, Guy A. E.	Building materials and electromagnetic radiation: The role of material and shape	96-103
Rashad, Alaa	Cementitious materials and agricultural wastes as natural fine aggregate replacement in conventional mortar and concrete	119-141
Leiva, C. / Arenas, C. / Alonso-Fariñas, B. / Vilches, L. F. / Peceño, B. / Rodriguez-galán, M. / Baena, F.	Characteristics of fired bricks with co-combustion fly ashes	114-118
So, Albert / Al-Sharif, Lutfi / Hammoudeh, Ahmad	Concept design and derivation of the round trip time for a general two-dimensional elevator traffic system	165-177
Khalili-Araghi, Salman / Kolarevic, Branko	Development of a framework for dimensional customization system: A novel method for customer participation	231-238
Xie, Shuai / Yang, Yang / Hou, Guoyan / Wang, Jing / Ji, Zhijiang	Development of layer structured wave absorbing mineral wool boards for indoor electromagnetic radiation protection	79-85
Binici, Hanifi / Aksogan, Orhan	Eco-friendly insulation material production with waste olive seeds, ground PVC and wood chips	260-266
Serres, Nicolas / Braymand, Sandrine / Feugeas, Françoise	Environmental evaluation of concrete made from recycled concrete aggregate implementing life cycle assessment	24-33
Hanafizadeh, Pedram / Eshraghi, Javad / Ahmadi, Pouria / Sattari, Amirmohammad	Evaluation and sizing of a CCHP system for a commercial and office buildings	67-78
Secchi, Simone / Asdrubali, Francesco / Cellai, Gianfranco / Nannipieri, Elisa / Rotili, Antonella / Vannucchi, Irene	Experimental and environmental analysis of new sound-absorbing and insulating elements in recycled cardboard	1-12
Ferreira, Ricardo / Pereira, Diogo / Gago, António / Proença, Jorge	Experimental characterisation of cork agglomerate core sandwich panels for wall assemblies in buildings	194-210
Nada, S. A. / Elfeky, K. E.	Experimental investigations of thermal managements solutions in data centers buildings for different arrangements of cold aisles containments	41-49
Yin, Peng / Pate, Michael B. / Sweeney, James F.	Experimental performance evaluations and empirical model developments of residential furnace blowers with PSC and ECM motors	239-248
Bhattacharya, Subhashish / Saha, Tapan / Hossain, M. J.	Fault contribution from large photovoltaic systems in building power supply networks	222-230
Berger, Tania / Amann, Christof / Formayer, Herbert / Korjenic, Azra / Pospichal, Bernhard / Neururer, Christoph / Smutny, Roman	Impacts of external insulation and reduced internal heat loads upon energy demand of offices in the context of climate change in Vienna, Austria	86-95
Chen, Yuxiang / Galal, Khaled E. / Athienitis, Andreas K.	Integrating hollow-core masonry walls and precast concrete slabs into building space heating and cooling	277-287
Ntouala, Roger Firmin Donald / Onana, Vincent Laurent / Kamgang, Véronique / Ekodeck, Georges Emmanuel	Mineralogical, geochemical and mechanical characterization of the Ayos (East-Cameroon) lateritic and alluvial clayey mixtures: Suitability for building application	50-56
Ndjigui, Paul-Désiré / Mbey, Jean Aimé / Nzeukou, Aubin Nzeugang	Mineralogical, physical and mechanical features of ceramic products of the alluvial clastic clays from the Ngog-Lituba region, Southern Cameroon	151-157
Bassiouny, Ramadan / Ali, Mohamed R. O. / NourEldeen, El-Sadek H.	Modeling the Thermal Behavior of Egyptian Perforated Masonry Red Brick Filled with Material of Low Thermal Conductivity	158-164
Njeumen Nkayem, D. E. / Mbey, J. A. / Kenne Diffo, B. B. / Njopwouo, D.	Preliminary study on the use of corn cob as pore forming agent in lightweight clay bricks: Physical and mechanical features	254-259
Ajayi, Saheed O. / Oyedele, Lukumon O. / Akinade, Olugbenga O. / Bilal, Muhammad / Owolabi, Hakeem A. / Alaka, Hafiz A. / Kadiri, Kabir O.	Reducing waste to landfill: A need for cultural change in the UK construction industry	185-193
Johnson, Timothy P. / Dowell, Robert K. / Silva, John F.	A review of code seismic demands for anchorage of nonstructural components	249-253
Kamseu, Elie / Ponzoni, Chiara / Tippayasam, Chayanee / Taurino, Rosa / Chaysuwan, Duangrudee / Sglavo, Vincenzo M. / Thavorniti, Parjaree / Leonelli, Cristina	Self-compacting geopolymer concretes: Effects of addition of aluminosilicate-rich fines	211-221
Pirkandi, Jamasb / Jokar, Mohammad Ali / Sameti, Mohammad / Kasaeian, Alibakhsh / Kasaeian, Fazel	Simulation and multi-objective optimization of a combined heat and power (CHP) system integrated with low-energy buildings	13-23
Williams Portal, Natalie / Flansbjer, Mathias / Johannesson, Pär / Malaga, Katarina / Lundgren, Karin	Tensile behaviour of textile reinforcement under accelerated ageing conditions	57-66
Hadded, Abderrazak / Benltoufa, Sofien / Fayala, Faten / Jemni, Abdelmajid	Thermo physical characterisation of recycled textile materials used for building insulating	34-40

Auteur(s)

Titre

Page(s)

Aly, Aly-Mousaad / Bresowar, Joseph

Aerodynamic mitigation of wind-induced uplift forces on low-rise buildings: A comparative study

267-276

Fernandes, Claribel / de Brito, Jorge / Cruz, Carlos Oliveira

Architectural integration of ETICS in building rehabilitation

178-184

Quagliarini, Enrico / Monni, Francesco / Bondioli, Federica / Lenci, Stefano

Basalt fiber ropes and rods: Durability tests for their use in building engineering

142-150

Rossi, S. / Fedel, M. / Petrolli, S. / Deflorian, F.

Behaviour of different removers on permanent anti-graffiti organic coatings

104-113

Vizi, Gergely Norbert / Vandenbosch, Guy A. E.

Building materials and electromagnetic radiation: The role of material and shape

96-103

Rashad, Alaa

Cementitious materials and agricultural wastes as natural fine aggregate replacement in conventional mortar and concrete

119-141

Leiva, C. / Arenas, C. / Alonso-Fariñas, B. / Vilches, L. F. / Peceño, B. / Rodriguez-galán, M. / Baena, F.

Characteristics of fired bricks with co-combustion fly ashes

114-118

So, Albert / Al-Sharif, Lutfi / Hammoudeh, Ahmad

Concept design and derivation of the round trip time for a general two-dimensional elevator traffic system

165-177

Khalili-Araghi, Salman / Kolarevic, Branko

Development of a framework for dimensional customization system: A novel method for customer participation

231-238

Xie, Shuai / Yang, Yang / Hou, Guoyan / Wang, Jing / Ji, Zhijiang

Development of layer structured wave absorbing mineral wool boards for indoor electromagnetic radiation protection

79-85

Binici, Hanifi / Aksogan, Orhan

Eco-friendly insulation material production with waste olive seeds, ground PVC and wood chips

260-266

Serres, Nicolas / Braymand, Sandrine / Feugeas, Françoise

Environmental evaluation of concrete made from recycled concrete aggregate implementing life cycle assessment

24-33

Hanafizadeh, Pedram / Eshraghi, Javad / Ahmadi, Pouria / Sattari, Amirmohammad

Evaluation and sizing of a CCHP system for a commercial and office buildings

67-78

Secchi, Simone / Asdrubali, Francesco / Cellai, Gianfranco / Nannipieri, Elisa / Rotili, Antonella / Vannucchi, Irene

Experimental and environmental analysis of new sound-absorbing and insulating elements in recycled cardboard

1-12

Ferreira, Ricardo / Pereira, Diogo / Gago, António / Proença, Jorge

Experimental characterisation of cork agglomerate core sandwich panels for wall assemblies in buildings

194-210

Nada, S. A. / Elfeky, K. E.

Experimental investigations of thermal managements solutions in data centers buildings for different arrangements of cold aisles containments

41-49

Yin, Peng / Pate, Michael B. / Sweeney, James F.

Experimental performance evaluations and empirical model developments of residential furnace blowers with PSC and ECM motors

239-248

Bhattacharya, Subhashish / Saha, Tapan / Hossain, M. J.

Fault contribution from large photovoltaic systems in building power supply networks

222-230

Berger, Tania / Amann, Christof / Formayer, Herbert / Korjenic, Azra / Pospichal, Bernhard / Neururer, Christoph / Smutny, Roman

Impacts of external insulation and reduced internal heat loads upon energy demand of offices in the context of climate change in Vienna, Austria

86-95

Chen, Yuxiang / Galal, Khaled E. / Athienitis, Andreas K.

Integrating hollow-core masonry walls and precast concrete slabs into building space heating and cooling

277-287

Ntouala, Roger Firmin Donald / Onana, Vincent Laurent / Kamgang, Véronique / Ekodeck, Georges Emmanuel

Mineralogical, geochemical and mechanical characterization of the Ayos (East-Cameroon) lateritic and alluvial clayey mixtures: Suitability for building application

50-56

Ndjigui, Paul-Désiré / Mbey, Jean Aimé / Nzeukou, Aubin Nzeugang

Mineralogical, physical and mechanical features of ceramic products of the alluvial clastic clays from the Ngog-Lituba region, Southern Cameroon

151-157

Bassiouny, Ramadan / Ali, Mohamed R. O. / NourEldeen, El-Sadek H.

Modeling the Thermal Behavior of Egyptian Perforated Masonry Red Brick Filled with Material of Low Thermal Conductivity

158-164

Njeumen Nkayem, D. E. / Mbey, J. A. / Kenne Diffo, B. B. / Njopwouo, D.

Preliminary study on the use of corn cob as pore forming agent in lightweight clay bricks: Physical and mechanical features

254-259

Ajayi, Saheed O. / Oyedele, Lukumon O. / Akinade, Olugbenga O. / Bilal, Muhammad / Owolabi, Hakeem A. / Alaka, Hafiz A. / Kadiri, Kabir O.

Reducing waste to landfill: A need for cultural change in the UK construction industry

185-193

Johnson, Timothy P. / Dowell, Robert K. / Silva, John F.

A review of code seismic demands for anchorage of nonstructural components

249-253

Kamseu, Elie / Ponzoni, Chiara / Tippayasam, Chayanee / Taurino, Rosa / Chaysuwan, Duangrudee / Sglavo, Vincenzo M. / Thavorniti, Parjaree / Leonelli, Cristina

Self-compacting geopolymer concretes: Effects of addition of aluminosilicate-rich fines

211-221

Pirkandi, Jamasb / Jokar, Mohammad Ali / Sameti, Mohammad / Kasaeian, Alibakhsh / Kasaeian, Fazel

Simulation and multi-objective optimization of a combined heat and power (CHP) system integrated with low-energy buildings

13-23

Williams Portal, Natalie / Flansbjer, Mathias / Johannesson, Pär / Malaga, Katarina / Lundgren, Karin

Tensile behaviour of textile reinforcement under accelerated ageing conditions

57-66

Hadded, Abderrazak / Benltoufa, Sofien / Fayala, Faten / Jemni, Abdelmajid

Thermo physical characterisation of recycled textile materials used for building insulating

34-40

Publicité

Journal of Building Engineering - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.