Francesco Petrini 
- (2024): Multi-hazard design of low-damage high-rise steel–timber buildings subjected to wind and earthquake loading. Dans: Engineering Structures, v. 303 (mars 2024).
- : Service life extension of strategic bridges. Dans: Structure and Infrastructure Engineering.
- (2023): Structural robustness analysis of RC frames under seismic and blast chained loads scenarios. Dans: Journal of Building Engineering, v. 67 (mai 2023).
- (2022): Component Test, Fracture Simulation and Experimental Study on Steel and Shear Panel for Seismic Resistance. Dans: ce/papers, v. 5, n. 4 (septembre 2022).
- (2021): Experimental Study on Steel Slit and Shear Panel for Seismic Resistance. Dans: ce/papers, v. 4, n. 2-4 (septembre 2021).
- (2021): Optimal design of the ideal grounded tuned mass damper inerter for comfort performances improvement in footbridges with practical implementation considerations. Dans: Structural Control and Health Monitoring, v. 28, n. 9 (3 août 2021).
- (2010): Basis of design and numerical modeling of offshore wind turbines. Dans: Structural Engineering and Mechanics, v. 36, n. 5 (novembre 2010).
- (2013): Numerical analyses for the structural assessment of steel buildings under explosions. Dans: Structural Engineering and Mechanics, v. 45, n. 6 (mars 2013).
- (2018): Piezoelectric energy harvesting from vortex shedding and galloping induced vibrations inside HVAC ducts. Dans: Energy and Buildings, v. 158 (janvier 2018).
- (2020): Multi-Hazard Assessment of Bridges in Case of Hazard Chain: State of Play and Application to Vehicle-Pier Collision Followed by Fire. Dans: Frontiers in Built Environment, v. 6 (janvier 2020).
- (2020): Optimal tuned mass-damper-inerter (TMDI) design in wind-excited tall buildings for occupants’ comfort serviceability performance and energy harvesting. Dans: Engineering Structures, v. 204 (février 2020).
- (2013): Performance-based fire design of complex structures. Dans: International Journal of Lifecycle Performance Engineering, v. 1, n. 2 ( 2013).
- (2012): Performance-based wind design of tall buildings. Dans: Structure and Infrastructure Engineering, v. 8, n. 10 (octobre 2012).
- (2011): A Preliminary Proposal for a Probabilistic Performance-Based Hurricane Engineering Framework. Présenté pendant: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2019): Optimal tuning and assessment of inertial dampers with grounded inerter for vibration control of seismically excited base-isolated systems. Dans: Engineering Structures, v. 196 (octobre 2019).
- (2007): Comparison of time domain techniques for the evaluation of the response and the stability in long span suspension bridges. Dans: Computers & Structures, v. 85, n. 11-14 (juin 2007).
- (2013): Performance-Based Hurricane Engineering (PBHE) framework. Dans: Structural Safety, v. 45 (novembre 2013).
- (2018): Improved risk-targeted performance-based seismic design of reinforced concrete frame structures. Dans: Earthquake Engineering and Structural Dynamics, v. 47, n. 1 (janvier 2018).
- (2016): Back calculation and model calibration for earthquake damaged bridges - a general procedure and its application to a highway viaduct. Dans: Structure and Infrastructure Engineering, v. 12, n. 8 (août 2016).
- (2011): Estimation of fatigue life for long span suspension bridge hangers under wind action and train transit. Dans: Structure and Infrastructure Engineering, v. 7, n. 7-8 (juillet 2011).
- (2016): Simplified fragility-based risk analysis for impulse governed blast loading scenarios. Dans: Engineering Structures, v. 117 (juin 2016).
- (2017): Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter. Dans: Journal of Structural Engineering (ASCE), v. 143, n. 9 (septembre 2017).
- (2014): Fragility analysis for the Performance-Based Design of cladding wall panels subjected to blast load. Dans: Engineering Structures, v. 78 (novembre 2014).
- (2017): Nonlinear Dynamic Behavior of Cable Nets Subjected to Wind Loading. Dans: Structures, v. 10 (mai 2017).
Structurae coopère avec
