0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

A small piezoelectric stack motor designed for vacuum and micro-dust environment

Auteur(s): ORCID
ORCID


Médium: article de revue
Langue(s): anglais
Publié dans: Smart Materials and Structures, , n. 1, v. 32
Page(s): 015009
DOI: 10.1088/1361-665x/aca733
Abstrait:

With the development of moon exploration, higher requirements have been proposed for the adaptability of small motors under vacuum and micro-dust conditions. In this paper, a rotational motor based on piezoelectric stacks is proposed, which can be driven by a single-phase direct current with a simple drive circuit. The motor dimensions are 24 mm × 24 mm × 24 mm (length × width × height), and the mass is 11.4 g. In air environment, the maximum output rotational speed of the motor is 1372 rpm, and the maximum stall torque is 3.2 mN m at 40 V DC and 5.93 kHz. An open-loop control system is established to drive the stepping motion of the motor, and the minimum stepping angle is measured as 0.122 mrad. An environmental experiment of the motor is conducted in a lunar simulator module, which can simulate a high vacuum (6.7 × 10−5 Pa) and micro-dust (average 75 μm) environment of the lunar surface. The result shows that the motor can work steadily in the vacuum and micro-dust environment with an average speed of 1723 rpm, which demonstrates its potential applications in the space environment.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1361-665x/aca733.
  • Informations
    sur cette fiche
  • Reference-ID
    10695317
  • Publié(e) le:
    10.12.2022
  • Modifié(e) le:
    10.12.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine