0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Physical and Mechanical Properties of Fly Ash Based Geopolymer Concrete Compared to Conventional Concrete

Auteur(s): ORCID


ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 5, v. 11
Page(s): 178
DOI: 10.3390/buildings11050178
Abstrait:

The potential of applying geopolymerization to a wide range of solid industrial waste and by-products is of great interest. In this research, the physical and mechanical properties of fly ash (FA)-based geopolymer concrete (GC), compared to those of cement concrete (CC), were studied. Three GCs with different content of FA and three appropriate CCs were designed, prepared, tested and evaluated. The results were compared with the requirements of Standards EN 206-1 and EN 1992-1-1. It was shown that in some cases minor adjustments of the regulations are needed, while in other cases complete revision is required. GC indicated competitive compressive strength compared to CC, tensile strength within the limits specified by Eurocode 2 for CC and modulus of elasticity about 50% less than that of CC. The ratio of binder (FA) to aggregates seems to have a significant effect on the properties of GC. The concrete with 750 kg/m³ FA seems to be the best choice taking into consideration both engineering and environmental criteria.

Copyright: © 2021 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10604268
  • Publié(e) le:
    26.04.2021
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine