0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

A low speed piezoelectric actuator with high displacement smoothness and its multi-objective optimized method

Auteur(s):


ORCID

ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Smart Materials and Structures, , n. 10, v. 32
Page(s): 105036
DOI: 10.1088/1361-665x/acf96e
Abstrait:

Piezoelectric actuators are widely utilized in the precision industry field, but the existing piezoelectric actuators are difficult to achieve high displacement smoothness at low speed, which limits the practical application of the piezoelectric actuators. This work proposes a piezoelectric actuator that can achieve high displacement smoothness through a multi-leg coordinated actuation principle. A multi-objective optimized method based on adaptive mutation genetic algorithm is utilized to design the driving leg by comprehensively considering five design variables. The design goal of the maximum displacement of the driving foot and the minimum size of the driving leg are achieved. A prototype is fabricated and the characteristics are tested. The experimental results demonstrate the effectiveness of the optimized method. High displacement smoothness at low speed is also achieved. The output displacements of the proposed actuator at different driving voltages and frequencies show no regression and intermittent motion. The linearity R ² could reach 0.9978, and the low output speed of the actuator could reach 22.69 µrad s−1 at voltage of 100 Vp–p and frequency of 1 Hz.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1361-665x/acf96e.
  • Informations
    sur cette fiche
  • Reference-ID
    10742610
  • Publié(e) le:
    28.10.2023
  • Modifié(e) le:
    28.10.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine