0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

An Investigation of the Energy-Saving Optimization Design of the Enclosure Structure in High-Altitude Office Buildings

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 3, v. 14
Page(s): 645
DOI: 10.3390/buildings14030645
Abstrait:

Concerning the double carbon national strategy, the energy-saving renovation of old buildings has become one of the most important tasks of energy conservation and emission reduction in construction in China. There are many problems, such as high energy consumption, thermal environment, and poor thermal comfort. Taking Lhasa as an example, this study adopts field research, questionnaire interviews, on-site measurements, numerical simulations, and other methods to propose suitable energy-saving potential excavation points and thermal optimization strategies for office building envelopes in Lhasa through software simulation. Additionally, typical office buildings are selected to carry out the energy-saving renovation of envelopes with the goal of improving indoor thermal comfort to validate the feasibility of the energy-saving renovation strategies. The results show the following: (1) The measured and predicted thermal neutral temperatures of the office population in Lhasa are 16.5 °C and 18.9 °C, respectively. The 90% acceptable temperature range is from 16.10 °C to 21.77 °C, and the occupants of the office buildings in Lhasa have a higher tolerance for cold than predicted. (2) The passive measures adapted to Lhasa are prioritized in the order of passive solar energy, high-heat-capacity materials, and nighttime ventilation. (3) Through the optimization of the enclosure structure of existing office buildings, the improvement of the heat storage capacity of the outer enclosure structure, and the increase in the window opening area to increase natural ventilation, the indoor thermal comfort of the renovated buildings is effectively improved.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10773334
  • Publié(e) le:
    29.04.2024
  • Modifié(e) le:
    29.04.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine