0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

An Innovative Fire-Resistant Lightweight Concrete Infill Wall Reinforced with Waste Glass

Auteur(s): ORCID
ORCID
ORCID

Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 3, v. 14
Page(s): 626
DOI: 10.3390/buildings14030626
Abstrait:

In this paper, an innovative infill wall is proposed and examined experimentally and parametrically. The proposed wall has an innovative design and is constructed with lightweight concrete strengthened by waste glass. The proposed wall not only demonstrates robust performance against out-of-plane loading, but also exhibits exceptional behavior under elevated temperatures. Additionally, the necessary equations used to predict the wall’s behavior are also presented. The results reveal that glass powders affect weight loss. During the initial temperature application, ranging up to 600 °C, specimens with 0% and 8% glass powder experienced maximum and minimum weight loss, respectively. At 200 °C, glass powder concentrations below 4% caused a reduction in compressive strength, fc′, while concentrations between 4% and 8% led to an increase in fc′. Consequently, the optimal glass powder volume was determined to be 6% for specimens under varying temperature conditions. The out-of-plane loading tests indicated that although the wall was exposed to heat up to 800 °C, the resistance did not decrease significantly. Given its role as a non-load-bearing wall without the application of gravity, this innovative structure is anticipated to perform admirably in fire scenarios during seismic events.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10773374
  • Publié(e) le:
    29.04.2024
  • Modifié(e) le:
    05.06.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine