0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental Study on Flexural Behavior of RC–UHPC Slabs with EPS Lightweight Concrete Core

Auteur(s):


ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 6, v. 13
Page(s): 1372
DOI: 10.3390/buildings13061372
Abstrait:

This paper presents an experimental investigation that focuses on the flexural behavior of an innovative reinforced concrete–ultra-high performance concrete slab with an expanded polystyrene lightweight concrete core. This type of slab is proposed to serve the semi-precast solution, in which the bottom layer is ultra-high performance concrete working as a formwork during the construction of semi-precast slab, the expanded polystyrene lightweight concrete layer is used for the reduction of structure self-weight, and the top layer is normal concrete designed to withstand compressive stress when the slab is loaded. Two similar large-scale specimens with dimensions of 6200 mm × 1000 mm × 210 mm were fabricated and tested under four-point bending conditions to investigate the flexural behavior of composite slab. Test results indicated that three different layers of materials can work effectively together without separation. The bottom ultra-high performance concrete layer leads to the high ductility of the slab and has a good effect in limiting the widening of the crack width by forming other cracks. According to design code ACI 544.4R, a modified distribution stress diagram on the composite section was proposed and proven to be suitable for the prediction of flexural strength of the composite section with an error of 3.4% compared to the experimental result. The effect of the ultra-high performance concrete layer on the flexural strength of the composite slab was clearly demonstrated, and for the case in this study, the ultra-high performance concrete layer improves the flexural strength of the slab by about 11.5%.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10728282
  • Publié(e) le:
    30.05.2023
  • Modifié(e) le:
    01.06.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine