0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental design and adaptive modulation of piezoelectric cantilever phononic crystals for vibration attenuation in vehicle subframes

Auteur(s):
ORCID



Médium: article de revue
Langue(s): anglais
Publié dans: Smart Materials and Structures, , n. 2, v. 33
Page(s): 025026
DOI: 10.1088/1361-665x/ad1d09
Abstrait:

To attenuate the vibrations in the vehicle subframe with changing target frequency, a piezoelectric cantilever phononic crystal (PC) and its adaptive modulation strategy are investigated in this paper. First, based on the cantilever-based PC structure, the bandgap characteristics are obtained by vibration transfer calculation and piezoelectric constitutive modeling. The experimental design of the piezoelectric cantilever PC is further conducted based on the parametric analysis results of structural dimensions and the targeted vibration frequency intervals required by the vehicle subframe. The modal experiments indicate that two local resonant bandgaps and one electromagnetic oscillation bandgap appear in the solved frequency interval, and both of them exhibit excellent consistency with the theoretical calculations. Finally, an adaptive bandgap modulation strategy is proposed by controlling the shunting circuit parameters, and the execution results demonstrate that the PCs employed in the vehicle subframe can effectively achieve vibration attenuation from the powertrain systems. Starting from the experimental design and adaptive modulation of cantilever PCs with piezoelectric materials, this research presents a novel framework for the application of acoustic metamaterials in the vibration mitigation of automotive structures.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1361-665x/ad1d09.
  • Informations
    sur cette fiche
  • Reference-ID
    10758185
  • Publié(e) le:
    23.03.2024
  • Modifié(e) le:
    23.03.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine