0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Effect of Textile Layers and Hydroxypropyl Methylcellulose on Flexural Behavior of TRLC Thin Plates

Auteur(s): ORCID



ORCID


Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 4, v. 14
Page(s): 924
DOI: 10.3390/buildings14040924
Abstrait:

To examine the flexural toughness characteristics of textile-reinforced lightweight aggregate concrete (TRLC), a four-point bending test was conducted to assess the impact of varying numbers of textile layers and the inclusion of hydroxypropyl methylcellulose on the ultimate load-bearing capacity and deformation capacity of TRLC thin plates. Six groups of specimens were prepared for the experiment, and the bending capacity of the thin plates in each group was evaluated. The flexural toughness index was utilized to quantify the bending performance of TRLC thin plates. The findings revealed that increasing the number of textile layers improved the initial cracking load, initial cracking deflection, ultimate load, ductility, and flexural toughness of the thin plates. For the specimens without HPMC, the initial cracking load was increased by up to 36.1%, the ultimate load by up to 40.9%, and the flexural toughness index by up to 292% as the number of textile layers was increased. For specimens doped with HPMC, the initial cracking load was increased by up to 61.7%, the ultimate load by up to 246.7%, and the flexural toughness index by up to 65%. The TRLC thin plate containing hydroxypropyl methylcellulose exhibited a reduced initial cracking load yet displayed a stronger matrix consistency and good flexural toughness. Moreover, the enhancement in the ultimate load of TRLC thin plates with hydroxypropyl methylcellulose was more pronounced with an increased number of textile layers, resulting in a significantly higher number of cracks compared to TRLC without hydroxypropyl methylcellulose and an 11.40-fold increase in the flexural toughness index.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10773993
  • Publié(e) le:
    29.04.2024
  • Modifié(e) le:
    05.06.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine