0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Dynamic Response and Optimal Design of Radio Telescope Structure under Wind Load Excitation

Auteur(s):




ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 11, v. 13
Page(s): 2764
DOI: 10.3390/buildings13112764
Abstrait:

The dynamic response of a radio telescope structure under wind load excitation significantly impacts the accuracy of signal reception. To address this issue, this study established a parametric finite element model of a radio telescope to simulate its dynamic response under wind load excitation. An improved Latin hypercube sampling method was applied in the design of experiments (DOEs) to optimize the structural dimensional parameters of various components of the radio telescope with the aim of reducing the dynamic response to wind load. A response surface model and multi-objective genetic algorithm (MOGA) were employed for multi-objective structural optimization of the radio telescope structure. The findings reveal that the thickness of the stiffening ribs, the length of the side of the square hollow pole, the thickness of the middle pole, and the inner diameter of the thin pole are the most influential structural parameters affecting the first_order frequency (F1), second-order frequency (F2), maximum deformation in the x-direction (DX), and maximum deformation in the z-direction (DZ) of the radio telescope, respectively. Optimizing the radio telescope results in a 40.00% improvement in F1 and a 24.16% enhancement in F2, while reducing DX by 43.94% and DZ by 64.25%. The study outcomes offer a comprehensive scheme for optimizing the structural dimensional parameters of various radio telescope components in regions characterized by multiple wind fields.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10753543
  • Publié(e) le:
    14.01.2024
  • Modifié(e) le:
    07.02.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine