Design and Performance Study of a Six-Leg Lattice Tower for Wind Turbines

A new type of spherical node was used to design a laboratory-scale prototype of a six-leg lattice of steel tubes and concrete for application as a wind turbine tower. Repeated load tests were performed on the prototype tower for several weeks to evaluate its load-carrying capacity, deformation, energy consumption, stress distribution based on damage patterns, hysteresis curves, skeleton curves, strength, and stiffness degradation curves. The findings indicated that the prototype tower underwent thread damage to the high-strength bolts of the inclined web and weld damage between the inclined web and sealing plate. Although the stress differences between different measurement points were significant, the stress values were small at most of the measurement points. The maximum equivalent stress value was 294 MPa, which appeared in the middle layer of the BC surface. The P-Δ hysteresis curve had an inverse “S”-shape, and the bearing capacity was high. The maximum energy dissipation appeared in the 1.75 Δy loading stage. The peak load of the specimen can reach 376.2 kN, and the corresponding peak displacement is 37 mm. However, the average ductility coefficient was only 2.33, indicating little plastic deformation. The maximum strain of the tower column foot is 1800 με, and the force of the inclined web member in the middle layer is the largest. The strain of the transverse web bar increased significantly after the tower yielded, which contributed to maintaining the integrity of the structure.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.